Air Cleaner - Remove and Install
Removal Procedure
Show/hide table
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool. |
- Release latch (1) .
Show/hide table
Illustration 1 | g01155806 |
- Remove cover (2) from the air cleaner housing.
- Remove primary air filter element (4) from air cleaner housing (3) .
Show/hide table
Illustration 2 | g01155816 |
- Remove secondary air filter element (5) from air cleaner housing (3) .
Show/hide table
Illustration 3 | g01155824 |
- Loosen clamp (6) and disconnect hose (10) from air cleaner housing (3) .
Show/hide table
Illustration 4 | g01155831 |
- Loosen clamp (9) and disconnect hose (11) from air cleaner housing (3) .
- Remove screws (7) and open clamps (8). Remove air cleaner housing (3) .
Installation Procedure
- Install air cleaner housing (3) and close clamps (8). Install screws (7) .
Show/hide table
Illustration 5 | g01155831 |
- Connect hose (11) to air cleaner housing (3) and tighten clamp (9) .
- Connect hose (10) to air cleaner housing (3) and tighten clamp (6) .
- Install secondary air filter element (5) in air cleaner housing (3) .
Show/hide table
Illustration 6 | g01155824 |
- Install primary air filter element (4) in air cleaner housing (3) .
Show/hide table
Illustration 7 | g01155816 |
- Install cover (2) on the air cleaner housing.
Show/hide table
Illustration 8 | g01155806 |
- Secure latch (1) .
Caterpillar Information System:
966H and 972H Wheel Loaders Machine Systems Hydraulic Tank - Assemble
966H and 972H Wheel Loaders Machine Systems Hydraulic Tank - Disassemble
AccuGrade® Laser (CB420) CB 10 Set Limits Fault
AP-650B and BG-225C Asphalt Pavers Engine Supplement Fuel Priming Pump and Fuel Filter Base - Remove and Install
2005/04/04 A More Durable Step Assembly Is Now Available {4150}
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Piston Pump - Assemble
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Piston Pump - Disassemble
C7 Engines for Caterpillar Built Machines Air Inlet Heater Solenoid - Remove and Install
AP-650B and BG-225C Asphalt Pavers Engine Supplement Throttle Solenoid (Governor) - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Tie Rod (Steering)(Front) - Remove and Install - Two-Wheel Drive
AccuGrade® Laser (CB420) CB 1 Set Limits Fault
R2900G Load Haul Dump C15 Engine Supplement Belt Tightener - Remove
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Front Axle - Disassemble
C7 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
C7 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
730C2 EJECTOR Articulated Truck Tailgate
PM-201 Cold Planer Machine Systems Pump Control Valve
AP-650B and BG-225C Asphalt Pavers Engine Supplement Battery and Battery Cable - Separate and Connect
777D and 777D HAA Off-Highway Truck and 776D Off-Highway Tractor Body Retaining Pin
2005/05/16 New Valves for the Suspension Cylinder Are Available {7201, 7214}
2005/04/18 The Messenger Display System Is Available {7490, 7610, 7620}
C9 Engines for Caterpillar Built Machines Water Pump - Disassemble
AP-650B and BG-225C Asphalt Pavers Engine Supplement Exhaust (Muffler) - Remove and Install
RM-300 Soil Stabilizer Steering Cylinder Ends - Lubricate