Belt Tightener - Remove
Start By:
- Install the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".
- Remove the engine bottom guards. Refer to Disassembly and Assembly, "Bottom Guard (Engine) - Remove and Install".
- Remove three bolts (1), five bolts (2), bolt (4) and guard assembly (3).
Show/hide table
Illustration 2 g01157888 - Release the tension and remove three V-belts (5).
Show/hide table
Illustration 3 g01155538 - Remove jam nut (9).
- Remove locknut (6).
- Remove spring (7).
- Remove four bolts (10) and shaft assembly (8) from the engine.
Show/hide table
Illustration 4 g01155535 - Remove pin (12), cotter pin (14), retainer (13) and washer (11) from spring (7).
Show/hide table
Illustration 5 g01155537 - Remove bolt (15) and washer (16).
Show/hide table
Illustration 6 g01155825 - Remove arm assembly (17) from shaft assembly (8).
Show/hide table
Illustration 7 g01155841 - Remove four bolts (18) and cover (19).
Show/hide table
Illustration 8 g01155907 - Remove gasket (20).
Show/hide table
Illustration 9 g01155914 - Remove bolt (21) and two washers (22).
- Remove pulley (23) from arm assembly (17).
Show/hide table
Illustration 10 g01155927 - Remove spacer (24) and lip seal (25).
Show/hide table
Illustration 11 g01155934 - Remove ball bearing (26).
Show/hide table
Illustration 12 g01155935 - Remove spacer (27).
Show/hide table
Illustration 13 g01155936 - Remove ball bearing (28).
Show/hide table
Illustration 14 g01155939 - Remove retainer ring (29).
Show/hide table
Illustration 1 | g01157878 |
Caterpillar Information System:
AccuGrade® Laser (CB420) Diagnostic Code List
AccuGrade® Laser (CB420) Hydraulic System
AccuGrade® Laser (CB420) Test Valves Menu
AccuGrade® Laser (CB420) Test Control Box Menu
AccuGrade® Laser (CB420) Software Versions Menu
AccuGrade® Laser (CB420) Hour Meter Menu
AccuGrade® Laser (CB420) Fault History Menu
AccuGrade® Laser (CB420) Diagnostic Capabilities
2005/10/03 A New Hand Metering Unit is Now Used on the Soil Compactor {4343}
C7 Engines for Caterpillar Built Machines Fan Drive Mounting Group
C7 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
AccuGrade® Laser (CB420) CB 1 Set Limits Fault
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Tie Rod (Steering)(Front) - Remove and Install - Two-Wheel Drive
AP-650B and BG-225C Asphalt Pavers Engine Supplement Throttle Solenoid (Governor) - Remove and Install
C7 Engines for Caterpillar Built Machines Air Inlet Heater Solenoid - Remove and Install
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Piston Pump - Disassemble
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Piston Pump - Assemble
2005/04/04 A More Durable Step Assembly Is Now Available {4150}
AP-650B and BG-225C Asphalt Pavers Engine Supplement Fuel Priming Pump and Fuel Filter Base - Remove and Install
AccuGrade® Laser (CB420) CB 10 Set Limits Fault
966H and 972H Wheel Loaders Machine Systems Hydraulic Tank - Disassemble
966H and 972H Wheel Loaders Machine Systems Hydraulic Tank - Assemble
AP-650B and BG-225C Asphalt Pavers Engine Supplement Air Cleaner - Remove and Install