AP-650B and BG-225C Asphalt Pavers Engine Supplement Caterpillar

Removal Procedure

Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.

Show/hide table

Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.

1. Turn the battery disconnect switch to the OFF position.

Show/hide table



Illustration 1	g01155636

2. Remove nut (2) and remove ball joint (1) from the engine.

Show/hide table



Illustration 2	g01155708

3. Remove clamp (3) and move hose assemblies (5) out of the way.

4. Disconnect harness assembly (7) .

5. Remove bolts (6) and remove throttle solenoid (4) .

Installation Procedure

Show/hide table



Illustration 3	g01155708

1. Install throttle solenoid (4) and bolts (6) .

2. Connect harness assembly (7) .

3. Reposition hose assemblies (5) and install clamp (3) .

Show/hide table



Illustration 4	g01155636

4. Install ball joint (1) and nut (2) on the engine.

5. Turn the battery disconnect switch to the ON position.