Battery and Battery Cable - Separate and Connect
Separation Procedure
- Turn the battery disconnect switch to the OFF position.
- Open the access panel to the battery compartment.
- Disconnect battery cable (4) from battery (2) .
Note: Do not allow the disconnected battery cables to contact the battery disconnect switch. Do not allow the disconnected battery cables to contact the other cables. Do not allow the disconnected battery cables to contact the opposite terminal of either battery.
Show/hide table
Illustration 1 | g01155916 |
- Disconnect battery cable (1) from battery (3) and battery (2) .
- Disconnect battery cable (5) from battery (3) .
Connection Procedure
Note: Do not allow the disconnected battery cables to contact the battery disconnect switch. Do not allow the disconnected battery cables to contact the other cables. Do not allow the disconnected battery cables to contact the opposite terminal of either battery.
- Connect battery cable (5) to battery (3) .
Show/hide table
Illustration 2 | g01155916 |
- Connect battery cable (1) to battery (3) and battery (2) .
- Connect battery cable (4) to battery (2) .
- Close the access panel to the battery compartment.
- Turn the battery disconnect switch to the ON position.
Caterpillar Information System:
PM-201 Cold Planer Machine Systems Pump Control Valve
730C2 EJECTOR Articulated Truck Tailgate
C7 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
C7 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Front Axle - Disassemble
AP-650B and BG-225C Asphalt Pavers Engine Supplement Air Cleaner - Remove and Install
966H and 972H Wheel Loaders Machine Systems Hydraulic Tank - Assemble
966H and 972H Wheel Loaders Machine Systems Hydraulic Tank - Disassemble
AccuGrade® Laser (CB420) CB 10 Set Limits Fault
AP-650B and BG-225C Asphalt Pavers Engine Supplement Fuel Priming Pump and Fuel Filter Base - Remove and Install
2005/04/04 A More Durable Step Assembly Is Now Available {4150}
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Piston Pump - Assemble
777D and 777D HAA Off-Highway Truck and 776D Off-Highway Tractor Body Retaining Pin
2005/05/16 New Valves for the Suspension Cylinder Are Available {7201, 7214}
2005/04/18 The Messenger Display System Is Available {7490, 7610, 7620}
C9 Engines for Caterpillar Built Machines Water Pump - Disassemble
AP-650B and BG-225C Asphalt Pavers Engine Supplement Exhaust (Muffler) - Remove and Install
RM-300 Soil Stabilizer Steering Cylinder Ends - Lubricate
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0139 - FMI 03
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Crankcase Guard - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Front Axle - Assemble
2005/04/25 An Improved Hose for the Rod End of the Bucket Cylinder is Available {5057}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0139 - FMI 05
777D and 777D HAA Off-Highway Truck and 776D Off-Highway Tractor Frame and Body Support Pads - Clean/Inspect