Axle Guards (Front) - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 138-7575 | 连杆支架 | 2 |
开始:
- 拆下前压实机钢轮。 请参阅拆解和组装, "压实机钢轮（前）- 拆卸"。
- 将工具 (A) 和适当的起吊设备固定到前桥防护罩 (1) 上。
Show/hide table
 | |
| 图 1 | g01146168 |
- 卸下螺栓 (2) 。
Show/hide table
 | |
| 图 2 | g01146182 |
- 拆下螺栓 (3) 。 拆下前桥防护罩 (1) 。 前桥防护罩 (1) 的重量约为 73 kg (160 lb)。
Show/hide table
 | |
| 图 3 | g01146184 |
- 拆下螺栓 (4) 和板 (5) 。 对底部重复此操作。
Show/hide table
 | |
| 图 4 | g01146188 |
- 卸下螺栓 (7) 和防护罩 (6) 。
Show/hide table
 | |
| 图 5 | g01146193 |
- 卸下螺栓 (8) 和防护罩 (9) 。
Show/hide table
 | |
| 图 6 | g01146222 |
- 对于另一侧重复步骤 1 至步骤 6。
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 138-7575 | 连杆支架 | 2 |
- 安置护罩 (9) 并安装螺栓 (8) 。
Show/hide table
| | |
| 图 7 | g01146222 |
- 安置护罩 (6) 并安装螺栓 (7) 。
Show/hide table
| | |
| 图 8 | g01146193 |
- 安置盘 (5) ，安装螺栓 (4) 。 对底部重复此操作。
Show/hide table
| | |
| 图 9 | g01146188 |
- 将工具 (A) 和适当的起吊设备固定到前桥防护罩 (1) 上后定位前桥防护罩 (1) 。 前桥防护罩 (1) 的重量约为 73 kg (160 lb)。
Show/hide table
| | |
| 图 10 | g01146168 |
- 将螺栓 (3) 安装到前桥防护罩 (1) 上。
Show/hide table
| | |
| 图 11 | g01146184 |
- 安装螺栓 (2) 。
Show/hide table
| | |
| 图 12 | g01146182 |
- 对于另一侧重复步骤 1 至步骤 6。
End By: 安装前压实机钢轮。 请参阅 拆解和组装, "压实机钢轮（前）- 安装"。
Caterpillar Information System:
PM-201 Cold Planer Machine Systems Hydraulic Cylinder (Conveyor Lift)
834H Wheel Dozer and 836H Landfill Compactor Power Train Final Drive and Wheel - Install - Rear
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Piston Pump (Main Hydraulic) - Remove
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Coolant Tank
R2900G Load Haul Dump Machine Electrical System Ride Control System
R1300G Series II Load Haul Dump C6.6 Engine Supplement Radiator - Remove
R2900G Load Haul Dump Machine Electrical System Alert Indicator - Transmission Oil Pressure
R2900G Load Haul Dump Machine Electrical System Alert Indicator - Brake Accumulator Oil Pressure
R2900G Load Haul Dump Machine Electrical System Lift Arm Positioner
C18 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Manifold and Reducing Valve (Pilot Oil) - Install
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Manifold and Reducing Valve (Pilot Oil) - Remove
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Piston Pump (Main Hydraulic) - Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
C7 and C9 Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
2005/03/07 An Improved Sight Gauge Is Now Available {5056}
2005/02/28 Finding the Latest Flash Files {7620}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Install
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Remove
Procedure to Install EP Control Plate on the Paving Compactors{5455} Procedure to Install EP Control Plate on the Paving Compactors{5455}
R2900G Load Haul Dump C15 Engine Supplement Steering Frame Lock - Remove and Install
Nexus Gear Pump Porting{5073} Nexus Gear Pump Porting{5073}
R2900G Load Haul Dump C15 Engine Supplement System Pressure - Release
R2900G Load Haul Dump Machine Electrical System Indicator - Automatic Lubrication