Final Drive and Wheel - Install - Rear
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7573     | 连杆支架     | 2     |
C     | 1U-9200     | 操纵杆滚轮起重机     | 3     |
D     | 138-7574     | 连杆支架     | 3     |
E     | 140-7742     | 套筒     | 3     |
F     | 6 V     | 深度千分尺     | 1     |
G     | -     | 千分尺 1-2 in     |
1     |
- 将 Duo-Cone 密封 (16) 安装到心轴 (18) 上。 请参阅拆解和组装, "Duo-Cone 密封 - 安装"。 加热轴承内圈 (17) 。 将轴承内圈 (17) 安装到心轴 (18) 上。
Show/hide table
图 1 | g01146023 |
- 冷却轴承外圈 (13) 和 (14) 。 将轴承外圈 (13) 和 (14) 安装到车轮 (3) 上。 安装 Duo-Cone 密封 (15) 。 请参阅拆解和组装, "Duo-Cone 密封 - 安装"。
Show/hide table
图 2 | g01146022 |
- 将工具 (C) 、工具 (D) 和适当的起吊设备固定到车轮 (3) 上后定位车轮 (3) 。 车轮 (3) 的重量约为 250 kg (550 lb)。 将工具 (A) 固定到防护罩组件 (7) 上。 将工具 (D) 固定到车轮 (3) 上。 通过将工具 (C) 固定到工具 (A) 和工具 (D) 上来固定车轮 (3) 。
Show/hide table
图 3 | g01146074 |
- 将护圈 (11) 定位到齿圈 (10) 上。
Show/hide table
图 4 | g01145927 |
- 加热轴承内圈 (12) 后将轴承内圈 (12) 安装到轮毂组件 (5) 上。
Show/hide table
图 5 | g01145959 |
- 将适当的起吊设备和工具 (E) 固定到轮毂组件 (5) 上。 轮毂组件 (5) 的重量约为 68 kg (150 lb)。 将轮毂组件 (5) 装入齿圈 (10) 中。 安装螺栓 (9) 。
Show/hide table
图 6 | g01145919 |
- 将适当的起吊设备和工具 (E) 固定到轮毂组件 (5) 上后定位轮毂组件 (5) 和齿圈 (10) 。 轮毂组件 (5) 和齿圈 (10) 的组合重量约为 159 kg (350 lb)。
Show/hide table
图 7 | g01146079 |
Show/hide table
图 8 | g01146024 |
Show/hide table
图 9 | g01144927 |
- 利用工具 (F) 测量护圈 (6) 在三个位置 (X) 处的厚度。 计算得到三个读数的平均值后记录测量结果。
- 定位护圈 (6) 而不加垫片 (8) 。 按图 9 中所示的数字顺序安装螺栓 (4) 。 拧紧螺栓 (4) 至扭矩为 112 ± 18 N·m (83 ± 13 lb ft)。
- 将工具 (D) 从车轮 (3) 的两侧拆下。 将适当的起吊设备从轮毂组件 (5) 上拆下。 转动车轮 (3) 一整圈。
- 轻轻松开螺栓 (4) 。 根据图 9 中的上紧顺序上紧螺栓 (4) 。 拧紧螺栓 (4) 至扭矩为 50 ± 9 N·m (37 ± 7 lb ft)。 转动车轮 (3) 一整圈。
- 利用工具 (G) 在位置 (X) 处进行三点测量。 计算得到三个读数的平均值后记录测量结果。
- 用步骤 12 中记录的测量值减去步骤 8 中记录的测量值。 用该测量值加上 0.10 mm (0.004 in)。 记录下测量值。 此测量值是所需要的总垫片组厚度。
- 利用工具 (G) 测量垫片 (8) 的厚度。 垫片 (8) 的厚度必须在步骤 13 中所记录测量值 0.025 mm (0.0010 in) 的范围内。
- 将适当的起吊设备固定到轮毂组件 (5) 上。 通过将工具 (D) 、工具 (C) 和工具 (E) 固定到车轮 (3) 上固定车轮 (3) 。 拆下螺栓 (4) 和挡圈 (6) 。
- 定位垫片 (8) 和护圈 (6) 。 安装螺栓 (4) 。 用 530 ± 70 N·m (391 ± 52 lb ft) 的扭矩拧紧螺栓 (4) 。
- 将工具 (A) 和适当的起吊设备固定到终传动 (2) 上后定位终传动 (2) 。 终传动 (2) 的重量约为 136 kg (300 lb)。
Show/hide table
图 10 | g01145838 |
- 安装螺栓 (1) 。
- 对于另一侧重复步骤 1 至步骤 18。
End By:
- 安装后轮轴。 请参阅 拆解和装配, "车桥轮轴 - 拆卸和安装"。
- 安装 834H 的后轮胎和轮辋。 请参阅 拆解和组装, "轮胎和轮辋(后)- 安装"。
- 安装 836H 的后压实机钢轮。 请参阅 拆解和组装, "压实机钢轮(后)- 安装"。
Caterpillar Information System:
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Piston Pump (Main Hydraulic) - Remove
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Coolant Tank
R2900G Load Haul Dump Machine Electrical System Ride Control System
R1300G Series II Load Haul Dump C6.6 Engine Supplement Radiator - Remove
R2900G Load Haul Dump Machine Electrical System Alert Indicator - Transmission Oil Pressure
R2900G Load Haul Dump Machine Electrical System Alert Indicator - Brake Accumulator Oil Pressure
R2900G Load Haul Dump Machine Electrical System Lift Arm Positioner
C18 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Manifold and Reducing Valve (Pilot Oil) - Install
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Manifold and Reducing Valve (Pilot Oil) - Remove
2005/03/07 New Mounting Hardware for the Wiring Harness is Used {1000, 1408}
C7 and C9 Engines for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
PM-201 Cold Planer Machine Systems Hydraulic Cylinder (Conveyor Lift)
834H Wheel Dozer and 836H Landfill Compactor Power Train Axle Guards (Front) - Remove and Install
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Piston Pump (Main Hydraulic) - Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
C7 and C9 Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
2005/03/07 An Improved Sight Gauge Is Now Available {5056}
2005/02/28 Finding the Latest Flash Files {7620}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Install
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Remove
Procedure to Install EP Control Plate on the Paving Compactors{5455} Procedure to Install EP Control Plate on the Paving Compactors{5455}
R2900G Load Haul Dump C15 Engine Supplement Steering Frame Lock - Remove and Install
Nexus Gear Pump Porting{5073} Nexus Gear Pump Porting{5073}