826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Caterpillar


Relief Valve (Torque Converter Outlet)

Usage:

824H ASX



Illustration 1g00626764

Pressure setting ... 414 ± 34 kPa (60 ± 5 psi)

(1) Torque for the four bolts ... 47 ± 9 N·m (35 ± 7 lb ft)

(2) 5M-9548 Spring for the Poppet Valve

Length under test force ... 21.3 mm (0.84 inch)
Test force ... 4.4 ± 0.4 N (1.0 ± 0.08 lb)
Free length after test ... 34.0 mm (1.34 inch)
Outside diameter ... 12.2 mm (0.48 inch)

(3) As required, install the spacers.

5M-9622 Spacer

Spacer thickness ... 1.60 mm (0.063 inch)
Spacer outside diameter ... 20.62 ± 0.25 mm (0.812 ± 0.010 inch)
The addition or removal of one spacer will change the outlet pressure by the following amount. ... 39.1 kPa (5.67 psi)

5M-9623 Spacer

Spacer thickness ... 0.90 mm (0.035 inch)
Spacer outside diameter ... 20.62 ± 0.25 mm (0.812 ± 0.010 inch)
The addition or removal of one spacer will change the outlet pressure by the following amount. ... 22.3 kPa (3.24 psi)

5M-9624 Spacer

Spacer thickness ... 0.25 mm (0.010 inch)
Spacer outside diameter ... 20.62 ± 0.25 mm (0.812 ± 0.010 inch)
The addition or removal of one spacer will change the outlet pressure by the following amount. ... 7.6 kPa (0.9 psi)

(4) 8M-8627 Spring (white stripe)

Length under test force ... 53.6 mm (2.11 inch)
Test force ... 395 ± 32 N (90 ± 7 lb)
Free length after test ... 78.7 mm (3.10 inch)
Outside diameter ... 19.81 mm (0.780 inch)

Caterpillar Information System:

826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Torque Converter
AP-655C and BG-2255C Asphalt Pavers Attachments Control Valve (Generator)
AP-655C and BG-2255C Asphalt Pavers Attachments Piston Motor (Generator) - 23 kW
AP-655C and BG-2255C Asphalt Pavers Attachments Gear Motor (Generator) - 8 kW
AP-655C and BG-2255C Asphalt Pavers Attachments Hydraulic Filter (Return)
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Piston Pump (Vibratory) - Remove
AP-655C and BG-2255C Asphalt Pavers Attachments Gear Motor (Ventilation System)
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
PS-150C Pneumatic Compactor Engine Supplement Engine Enclosure (Hood) - Remove and Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Oscillating Axle (Rear)
414E, 416E, 420E and 430E Backhoe Loaders Backup Alarm Always Off
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Hydraulic Tank
R1600G Load Haul Dump Machine Systems Main Control Valve - Assemble
R1300G Load Haul Dump Machine Systems Gear Pump (Secondary Steering) - Remove
R1300G Load Haul Dump Machine Systems Gear Pump (Secondary Steering) - Install
Installing the 233-5706, 233-5638 Work Tool Control and Wiring Kits {1408, 5705, 7000} Installing the 233-5706, 233-5638 Work Tool Control and Wiring Kits {1408, 5705, 7000}
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Fuel Priming Pump and Fuel Filter Base - Remove and Install
C15 and C18 Petroleum Generator Sets Electronic Modular Control Panel 3 (EMCP 3)
AP-650B and BG-225C Asphalt Pavers Access Doors and Covers
PS-150C Pneumatic Compactor Engine Supplement Air Cleaner - Remove and Install
793B Off-Highway Truck Suspension Cylinder General Information
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Accumulator (Steering) - Test and Charge
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Temperature Sensor (Torque Converter Oil)
AP-655C and BG-2255C Asphalt Pavers Attachments Control Valve (Truck Hitch)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.