Torque Converter
Show/hide table
 | |
| Illustration 1 | g00628823 |
Show/hide table
 | |
| Illustration 2 | g00628825 |
Show/hide table
| Clearance Between Components | Clearance Across the Diameter | Running Clearance (1) | |
| (1) Turbine and the Housing | New | 1.89 to 2.89 mm (0.074 to 1.14 inch) |
0.95 to 1.45 mm (0.037 to 0.57 inch) |
| Maximum wear | 3.58 mm (0.141 inch) |
1.79 mm (0.071 inch) |
|
| (2) Impeller and the Housing | New | 1.22 to 1.88 mm (0.048 to 0.074 inch) |
0.66 to 0.94 mm (0.024 to 0.037 inch) |
| Maximum wear | 2.34 mm (0.092 inch) |
1.17 mm (0.046 inch) |
|
| (3) Stator and the Turbine | New | 0.50 to 1.02 mm (0.020 to 0.030 inch) |
0.25 to 0.51 mm (0.010 to 0.015 inch) |
| Maximum wear | 1.14 mm (0.045 inch) |
0.57 mm (0.023 inch) |
|
| (4) Stator and the Impeller | New | 0.55 to 1.07 mm (0.022 to 0.042 inch) |
0.25 to 0.54 mm (0.011 to 0.021 inch) |
| Maximum wear | 1.22 mm (0.048 inch) |
0.61 mm (0.024 inch) |
|
| (5) Hub and Cover Bearing |
New | 0.061 to 0.165 mm (0.0024 to 0.0064 inch) |
0.031 to 0.083 mm (0.0012 to 0.0032 inch) |
| (6) Hub and Carrier Bearing |
New | 0.061 to 0.165 mm (0.0024 to 0.0064 inch) |
0.031 to 0.083 mm (0.0012 to 0.0032 inch) |
| (7) Impeller Hub and Bearing Carrier | New | 0.29 to 0.41 mm (0.0114 to 0.0162 inch) |
0.15 to 0.21 mm (0.0057 to 0.0081 inch) |
Show/hide table
| ( 1 ) | Half of the clearance across the diameter |
(8) Torque for twenty bolts that fasten the turbine to the hub ... 50 ± 7 N·m (37 ± 5 lb ft)
(9) Torque for 12 bolts that fasten flange assembly to impeller ... 80 ± 10 N·m (59 ± 7 lb ft)
(10) Torque for 12 bolts that fasten gear to flange ... 50 ± 7 N·m (37 ± 5 lb ft)
(11) Torque for eight bolts that fasten cover assembly to housing ... 30 ± 5 N·m (22 ± 4 lb ft)
(12) Torque for 36 bolts that fasten flange assembly to housing ... 30 ± 5 N·m (22 ± 4 lb ft)
Caterpillar Information System:
AP-655C and BG-2255C Asphalt Pavers Attachments Control Valve (Generator)
AP-655C and BG-2255C Asphalt Pavers Attachments Piston Motor (Generator) - 23 kW
AP-655C and BG-2255C Asphalt Pavers Attachments Gear Motor (Generator) - 8 kW
AP-655C and BG-2255C Asphalt Pavers Attachments Hydraulic Filter (Return)
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Piston Pump (Vibratory) - Remove
AP-655C and BG-2255C Asphalt Pavers Attachments Gear Motor (Ventilation System)
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
PS-150C Pneumatic Compactor Engine Supplement Engine Enclosure (Hood) - Remove and Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Oscillating Axle (Rear)
414E, 416E, 420E and 430E Backhoe Loaders Backup Alarm Always Off
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Hydraulic Tank
414E, 416E, 420E and 430E Backhoe Loaders Backup Alarm Always On
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Relief Valve (Torque Converter Outlet)
R1600G Load Haul Dump Machine Systems Main Control Valve - Assemble
R1300G Load Haul Dump Machine Systems Gear Pump (Secondary Steering) - Remove
R1300G Load Haul Dump Machine Systems Gear Pump (Secondary Steering) - Install
Installing the 233-5706, 233-5638 Work Tool Control and Wiring Kits {1408, 5705, 7000} Installing the 233-5706, 233-5638 Work Tool Control and Wiring Kits {1408, 5705, 7000}
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Fuel Priming Pump and Fuel Filter Base - Remove and Install
C15 and C18 Petroleum Generator Sets Electronic Modular Control Panel 3 (EMCP 3)
AP-650B and BG-225C Asphalt Pavers Access Doors and Covers
PS-150C Pneumatic Compactor Engine Supplement Air Cleaner - Remove and Install
793B Off-Highway Truck Suspension Cylinder General Information
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Accumulator (Steering) - Test and Charge
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Temperature Sensor (Torque Converter Oil)