Piston and Vane Pump - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-7505 | Hydraulic Jack | 1 |
- Use Tooling (A) in order to install piston and vane pump (10). The weight of piston and vane pump (10) is approximately
64 kg (140 lb) . - Install bolts (11).
Show/hide table
Illustration 2 g01087574 - Tighten bolt (9).
Show/hide table
Illustration 3 g01087573 - Connect hose assemblies (6), (7), and (8).
Show/hide table
Illustration 4 g01087572 - Connect hose (2).
- Tighten clamp (1).
- Connect hose (4).
- Tighten clamps (5).
- Connect hose assembly (3).
- Fill the hydraulic fluid. Refer to Operation and Maintenance Manual, "Lubricant Viscosities" and Operation and Maintenance Manual, "Capacities (Refill)".
Show/hide table
Illustration 1 | g01087575 |
End By:
- Install the pump drive. Refer to Disassembly and Assembly, "Pump Drive - Remove and Install".
- Install the counterweight. Refer to Disassembly and Assembly, "Counterweight - Remove and Install".
Caterpillar Information System:
446D Backhoe Loader Machine Systems Piston and Vane Pump - Remove
AP-800D and BG-230D Asphalt Pavers Machine Systems Pump Control Valve (Generator) - Test and Adjust
446D Backhoe Loader Machine Systems Swing Cylinder - Remove and Install
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Gear Motor (Fan Drive) - Remove
446D Backhoe Loader Machine Systems Boom - Remove and Install
R2900G Load Haul Dump Machine Systems Seat - Install
R2900G Load Haul Dump Machine Systems Seat - Remove
C27 and C32 Engines Lubrication System
CB-334E and CB-335E Paving Compactors Plate Locations and Film Locations
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Steering Wheel - Remove and Install
2004/07/19 Expected Battery Life for the Computer Aided Earthmoving Systems (CAES) Display Batteries and the Minestar (Tope) Display Batteries {1401}
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Air Tank (Primary)
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Valve Mechanism
2004/07/26 A New Solenoid Control is Now Used {1265, 1276, 1408}
2004/12/01 Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
PS-150C Pneumatic Compactor Propel System Relief Valve (Flushing Valve) - Test and Adjust - Machines with Optional Flow Divider
446D Backhoe Loader Machine Systems Floorplate - Remove and Install
446D Backhoe Loader Machine Systems Stabilizer Cylinder - Remove and Install
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Gear Motor (Fan Drive) - Install
2004/08/02 Correction to Special Instruction, REHS2143, "Product Link PL-102C System Installation" {7602}
238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320} 238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320}
R2900G Load Haul Dump Machine Systems Front Frame from Rear Frame - Separate
988H Wheel Loader Power Train Position Sensor (Left Brake Pedal) (Operator Monitor) - Calibrate
2004/07/26 A New Improved Articulation Lock Pin and a New Hitch are Now Used {7050, 7051}