A New Solenoid Control is Now Used {1265, 1276, 1408}
- Paving Compactor:
- CB-434C (S/N: 4DN1-UP; 4MW1-UP)
- Road Reclaimer/Soil Stabilizer:
- RM-350B (S/N: AXW1-UP)
- CB-534C (S/N: 5HN1-UP; 1WS1-UP)
- CB-634C (S/N: 3BR1-UP)
- CP-533D (S/N: AFC1-UP)
- CP-563D (S/N: 9ZW1-UP; 5LZ1-UP)
- CP-663E (S/N: AFL1-UP)
- CS-531D (S/N: AGH1-UP; 4MZ1-UP)
- CS-533D (S/N: AET1-UP; 5CZ1-UP)
- CS-563D (S/N: 9MW1-UP; 1SZ1-UP; 2RZ1-UP)
- CS-573D (S/N: CMK1-UP; 2YZ1-UP)
- CS-583D (S/N: 2CZ1-UP; 3GZ1-UP)
- CS-663E (S/N: AEF1-UP)
- CS-683E (S/N: AGR1-UP)
- RM350B (S/N: 7FS1-UP)
Description of Change: The new throttle solenoid is more reliable.
Adaptable To: The new 254-5463 Solenoid Control replaces the 119-7020 Solenoid Control .
The change is effective with the following machines:
- RM-350B (S/N: AXW287-UP)
Reference: Refer to Service Magazine, 03 February 2003, "The Governor Control Requires the Proper Adjustment" for the proper adjustment of the control solenoid.The change is adaptable with the following machines:
- CB-434C (S/N: 4DN1-UP; 4MW1-UP)
- CB-534C (S/N: 5HN1-UP; 1WS1-UP)
- CB-634C (S/N: 3BR1-UP)
- CP-533D (S/N: AFC1-UP)
- CP-563D (S/N: 9ZW1-UP; 5LZ1-UP)
- CP-663E (S/N: AFL1-UP)
- CS-531D (S/N: AGH1-UP; 4MZ1-UP)
- CS-533D (S/N: AET1-UP; 5CZ1-UP)
- CS-563D (S/N: 9MW1-UP; 1SZ1-UP; 2RZ1-UP)
- CS-573D (S/N: CMK1-UP; 2YZ1-UP)
- CS-583D (S/N: 2CZ1-UP; 3GZ1-UP)
- CS-663E (S/N: AEF1-UP)
- CS-683E (S/N: AGR1-UP)
- RM-350B (S/N: AXW1-286)
- RM350B (S/N: 7FS1-UP)
Caterpillar Information System:
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Valve Mechanism
446D Backhoe Loader Machine Systems Piston and Vane Pump - Install
446D Backhoe Loader Machine Systems Piston and Vane Pump - Remove
AP-800D and BG-230D Asphalt Pavers Machine Systems Pump Control Valve (Generator) - Test and Adjust
446D Backhoe Loader Machine Systems Swing Cylinder - Remove and Install
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Gear Motor (Fan Drive) - Remove
446D Backhoe Loader Machine Systems Boom - Remove and Install
R2900G Load Haul Dump Machine Systems Seat - Install
R2900G Load Haul Dump Machine Systems Seat - Remove
C27 and C32 Engines Lubrication System
CB-334E and CB-335E Paving Compactors Plate Locations and Film Locations
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Steering Wheel - Remove and Install
2004/12/01 Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
PS-150C Pneumatic Compactor Propel System Relief Valve (Flushing Valve) - Test and Adjust - Machines with Optional Flow Divider
446D Backhoe Loader Machine Systems Floorplate - Remove and Install
446D Backhoe Loader Machine Systems Stabilizer Cylinder - Remove and Install
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Gear Motor (Fan Drive) - Install
2004/08/02 Correction to Special Instruction, REHS2143, "Product Link PL-102C System Installation" {7602}
238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320} 238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320}
R2900G Load Haul Dump Machine Systems Front Frame from Rear Frame - Separate
988H Wheel Loader Power Train Position Sensor (Left Brake Pedal) (Operator Monitor) - Calibrate
2004/07/26 A New Improved Articulation Lock Pin and a New Hitch are Now Used {7050, 7051}
797B Off-Highway Truck Daily Inspection
C15 and C18 Engines for Caterpillar Built Machines Aftercooler - Test