Seat - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1DE2782     | Lifting Gp - Seat     | 1     |
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Note: Perform Step 1 of the following procedure for wheel steering machines only.
- Remove four bolts (2). Remove steering wheel (1) .
Show/hide table
Illustration 1 | g01087283 |
- Remove two bolts (4), the nuts and the washers.
Show/hide table
Illustration 2 | g01087284 |
- Pull lever (3) upwards and move the seat forward.
- Remove two bolts (5) and the nuts.
Show/hide table
Illustration 3 | g01101179 |
- Install Tooling (A) and a suitable lifting device to three anchor points on seat (6). Use the seat belt mounting brackets at the side of the seat and the weight adjusting shaft at the front of the seat as anchor points. The weight of seat (6) is approximately 43 kg (95 lb).
Show/hide table
Illustration 4 | g01087286 |
- Remove seat (6) from the cab.
Caterpillar Information System:
C27 and C32 Engines Lubrication System
CB-334E and CB-335E Paving Compactors Plate Locations and Film Locations
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Steering Wheel - Remove and Install
2004/07/19 Expected Battery Life for the Computer Aided Earthmoving Systems (CAES) Display Batteries and the Minestar (Tope) Display Batteries {1401}
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Air Tank (Primary)
3126B and 3126E Truck Engines Electric Starting Motor
2004/07/26 Correction to Operation and Maintenance Manual , "Lubricant Viscosities" {7581}
Topcon® System Five Safety Messages
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Muffler - Remove and Install
446D Backhoe Loader Machine Systems Boom Cylinder - Remove and Install
PS-150C Pneumatic Compactor Propel System Relief Valve (Flushing Valve) - Test and Adjust
120H and 135H Motor Graders Hydraulic and Steering System Accumulator (Steering)
R2900G Load Haul Dump Machine Systems Seat - Install
446D Backhoe Loader Machine Systems Boom - Remove and Install
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Gear Motor (Fan Drive) - Remove
446D Backhoe Loader Machine Systems Swing Cylinder - Remove and Install
AP-800D and BG-230D Asphalt Pavers Machine Systems Pump Control Valve (Generator) - Test and Adjust
446D Backhoe Loader Machine Systems Piston and Vane Pump - Remove
446D Backhoe Loader Machine Systems Piston and Vane Pump - Install
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Valve Mechanism
2004/07/26 A New Solenoid Control is Now Used {1265, 1276, 1408}
2004/12/01 Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
PS-150C Pneumatic Compactor Propel System Relief Valve (Flushing Valve) - Test and Adjust - Machines with Optional Flow Divider
446D Backhoe Loader Machine Systems Floorplate - Remove and Install