Parking Brake - Remove and Install
Removal Procedure
- Pull floor mat (1) away from cover (2) in order to expose screws (3) .
Show/hide table
Illustration 1 | g00754568 |
Show/hide table
Illustration 2 | g00770624 |
- Remove screws (3) and cover (2) .
- Remove clip (4) and pin (5) .
Show/hide table
Illustration 3 | g00770627 |
- Squeeze clip (7) together and pull cable (6) out of the parking brake assembly.
- Remove bolts (9) and parking brake lever assembly (8) .
Show/hide table
Illustration 4 | g01081817 |
- Remove clip (10) and pin (11) .
Show/hide table
Illustration 5 | g00770705 |
- Remove circlip (12) .
- Separate the cable from the bracket.
- Remove bolts (13) and the bracket.
- Remove bolts (14) .
Show/hide table
Illustration 6 | g00770708 |
- Remove caliper (15) .
- Remove bolts (16), washers (17), and bracket (18) .
Show/hide table
Illustration 7 | g00770715 |
- Remove the parking brake cable through the floorplate in the cab.
Installation Procedure
- Install the parking brake cable through the floorplate in the cab.
- Install bracket (18), washers (17), and bolts (16) .
Show/hide table
Illustration 8 | g00770715 |
- Install caliper (15). Install bolts (14) .
Show/hide table
Illustration 9 | g00770708 |
- Install the bracket for the parking brake cable.
Show/hide table
Illustration 10 | g00770705 |
- Install bolts (13) which retain the bracket.
- Insert the cable in the bracket.
- Install circlip (12) .
- Install pin (11) and clip (10) in the cable assembly.
- Install parking brake lever assembly (8) and bolts (9) .
Show/hide table
Illustration 11 | g01081817 |
- Install cable (6) in the parking brake assembly.
Show/hide table
Illustration 12 | g00770627 |
- Expand clip (7) .
- Install pin (5) and clip (4) .
- Install cover (2) and screws (3) .
Show/hide table
Illustration 13 | g00770624 |
Show/hide table
Illustration 14 | g00754568 |
- Reposition floor mat (1) .
Caterpillar Information System:
988H Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
AP-800D and BG-230D Asphalt Pavers Machine Systems Paver Ventilation System
446D Backhoe Loader Power Train Tire and Rim (Rear) - Remove and Install
446D Backhoe Loader Power Train Tire and Rim (Front) - Remove and Install
773E Off-Highway Truck Air Dryer Desiccant - Replace
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Assemble
CP-323C and CS-323C Paving Compactors Machine Systems Piston Motor (Axle Propel) - Install
CP-323C and CS-323C Paving Compactors Machine Systems Piston Motor (Axle Propel) - Remove
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Disassemble
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Seat - Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Engine - Install
988H Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Install
2004/06/28 Special Publications on Multi Terrain Loader Undercarriages Are Now Available {4150}
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Refrigerant Compressor - Remove and Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Refrigerant Condenser - Remove and Install
446D Backhoe Loader Power Train Drive Shaft (Front) - Remove and Install
AP-800D and BG-230D Asphalt Pavers Machine Systems Gear Motor (Ventilation)
797B Off-Highway Truck Engine Components - Rebuild//Replace/Install Reman - 797B LAA Machines Only
446D Backhoe Loader Power Train Drive Shaft (Rear) - Remove and Install
Installation Guide for the Machine Security System on Skid Steer Loaders and Multi Terrain Loaders{7631} Installation Guide for the Machine Security System on Skid Steer Loaders and Multi Terrain Loaders{7631}
988H Wheel Loader Machine Systems Evaporator Coil and Heater Coil - Remove
446D Backhoe Loader Engine Supplement Fuel Filter and Base - Remove and Install
446D Backhoe Loader Power Train Rear Axle - Remove