Tire and Rim (Front) - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 3S-6224     | Electric Hydraulic Pump Gp     | 1     |
8S-7610 | Base As     | 1     | |
8S-7650 | Cylinder As     | 1     | |
B     | 180-3034     | Repair Stand Set     | 2     |
- Loosen lug nuts (1) .
Note: Do not remove lug nuts (1) at this time.
Show/hide table
Illustration 1 | g01042295 |
- Repeat Step 1 for the other side.
- Use Tooling (A) in order to raise up the machine.
Show/hide table
Illustration 2 | g01042300 |
Show/hide table
Illustration 3 | g01042305 |
- Position Tooling (B) under frame (2), as shown.
- Use Tooling (A) in order to lower the machine onto Tooling (B) .
- Attach a suitable lifting device to tire and rim (3) .
Show/hide table
Illustration 4 | g01042299 |
- Remove lug nuts (1) .
- Use the suitable lifting device in order to remove tire and rim (3). The weight of tire and rim (3) is approximately 70 kg (155 lb).
- Repeat Steps 6 through 8 for the other side.
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 3S-6224     | Electric Hydraulic Pump Gp     | 1     |
8S-7610 | Base As     | 1     | |
8S-7650 | Cylinder As     | 1     | |
B     | 180-3034     | Repair Stand Set     | 2     |
- Attach a suitable lifting device to tire and rim (3). Use the suitable lifting device in order to install tire and rim (3). The weight of tire and rim (3) is approximately 70 kg (155 lb).
Show/hide table
Illustration 5 | g01042299 |
- Install lug nuts (1) .
- Repeat Steps 1 and 2 for the other side.
- Use Tooling (A) in order to raise up the machine. Remove Tooling (B) from underneath frame (2). Use Tooling (A) in order to lower the machine to the ground.
Show/hide table
Illustration 6 | g01042300 |
Show/hide table
Illustration 7 | g01042305 |
- Remove Tooling (A) .
- Tighten lug nuts (1) to a torque of 244 N·m (180 lb ft).
Show/hide table
Illustration 8 | g01042295 |
- Repeat Step 6 for the other side.
Caterpillar Information System:
773E Off-Highway Truck Air Dryer Desiccant - Replace
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Assemble
CP-323C and CS-323C Paving Compactors Machine Systems Piston Motor (Axle Propel) - Install
CP-323C and CS-323C Paving Compactors Machine Systems Piston Motor (Axle Propel) - Remove
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Disassemble
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Seat - Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Engine - Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Engine - Remove
572R Series II Pipelayer Hydraulic System Accumulator
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Remove
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Seat - Remove
446D Backhoe Loader Power Train Tire and Rim (Rear) - Remove and Install
AP-800D and BG-230D Asphalt Pavers Machine Systems Paver Ventilation System
988H Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
446D Backhoe Loader Power Train Parking Brake - Remove and Install
988H Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Install
2004/06/28 Special Publications on Multi Terrain Loader Undercarriages Are Now Available {4150}
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Refrigerant Compressor - Remove and Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Refrigerant Condenser - Remove and Install
446D Backhoe Loader Power Train Drive Shaft (Front) - Remove and Install
AP-800D and BG-230D Asphalt Pavers Machine Systems Gear Motor (Ventilation)
797B Off-Highway Truck Engine Components - Rebuild//Replace/Install Reman - 797B LAA Machines Only
446D Backhoe Loader Power Train Drive Shaft (Rear) - Remove and Install