Seat - Remove
- Remove knobs (1) and remove armrest (2).
Show/hide table
Illustration 2 g01081656 View of right side console - Remove bolt (3) and clip (4). Remove bolt (5) and disconnect harness assembly (6).
Show/hide table
Illustration 3 g01089661 Show/hide tableIllustration 4 g01081684 View of the right rear side of the cab
- Remove panel (6A). Disconnect harness assembly (7).
Show/hide table
Illustration 5 g01081691 - Remove bolts (8) and remove the right side console (9).
Show/hide table
Illustration 6 g01081697 - Remove bolt (11) and remove armrest (10).
Show/hide table
Illustration 7 g01081698 - Remove bolt (12).
Show/hide table
Illustration 8 g01081706 - Remove bolts (13). Disconnect harness assembly (14).
Show/hide table
Illustration 9 g01081710 - Rotate the seat. Lift up on lever (16) and slide the seat forward. Use two people in order to lift the seat off platform (17). The weight of seat (15) is approximately
43 kg (95 lb) . Use two people in order to remove platform (17). The weight of platform (17) is approximately27 kg (60 lb) .
Show/hide table
Illustration 1 | g01081651 |
Caterpillar Information System:
583T Pipelayer Power Train Torque Divider
CB-334E and CB-335E Vibratory Compactors Machine Systems Additive Tank - Remove and Install
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pump {3203, 5070} Bench Test Procedure for Hydraulic Piston Pump {3203, 5070}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System Check Valve (Dead Engine Lower)
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Engine Oil Cooler - Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Engine Oil Cooler - Remove
2004/06/21 Correction to Disassembly and Assembly , "Swing Drive - Install" {5459}
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Relief Valve (Line)
247B, 257B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 262B and 268B Skid Steer Loaders Maintenance Interval Schedule
CP-323C and CS-323C Paving Compactors Engine Supplement Pump Drive - Remove and Install
988H Wheel Loader Braking System Parking Brake
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Remove
572R Series II Pipelayer Hydraulic System Accumulator
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Engine - Remove
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Engine - Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Seat - Install
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Install
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Disassemble
CP-323C and CS-323C Paving Compactors Machine Systems Piston Motor (Axle Propel) - Remove
CP-323C and CS-323C Paving Compactors Machine Systems Piston Motor (Axle Propel) - Install
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Assemble
773E Off-Highway Truck Air Dryer Desiccant - Replace
446D Backhoe Loader Power Train Tire and Rim (Front) - Remove and Install