Tire and Rim (Rear) - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 180-3034     | Repair Stand Set     | 2     |
B     | 1U-7505     | Hydraulic Jack     | 1     |
- Loosen the lug nuts.
Note: Do not remove the lug nuts at this time.
- Use Tooling (B) in order to raise the machine.
Show/hide table
Illustration 1 | g01081789 |
- Position Tooling (A) under the machine frame.
- Use Tooling (B) in order to lower the machine onto Tooling (A) .
- Attach a suitable lifting device to tire and rim (2) .
Show/hide table
Illustration 2 | g00748999 |
- Remove lug nuts (1) .
- Use the suitable lifting device in order to remove tire and rim (2). The weight of tire and rim (2) is approximately 95 kg (210 lb).
- Repeat Steps 5 through 7 for the other side.
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 180-3034     | Repair Stand Set     | 2     |
B     | 1U-7505     | Hydraulic Jack     | 1     |
- Attach a suitable lifting device to tire and rim (2) .
Show/hide table
Illustration 3 | g00748999 |
- Use the suitable lifting device in order to install tire and rim (2). The weight of tire and rim (2) is approximately 95 kg (210 lb).
- Install lug nuts (1). Tighten lug nuts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft). Tighten nuts (1) for an additional 60° ± 5°.
- Repeat Steps 1 through 3 for the other side.
- Use Tooling (B) in order to raise the machine.
Show/hide table
Illustration 4 | g01081789 |
- Remove Tooling (A) .
- Use Tooling (B) in order to lower the machine to the ground.
- Remove Tooling (B) .
Caterpillar Information System:
446D Backhoe Loader Power Train Tire and Rim (Front) - Remove and Install
773E Off-Highway Truck Air Dryer Desiccant - Replace
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Assemble
CP-323C and CS-323C Paving Compactors Machine Systems Piston Motor (Axle Propel) - Install
CP-323C and CS-323C Paving Compactors Machine Systems Piston Motor (Axle Propel) - Remove
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Disassemble
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Seat - Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Engine - Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Engine - Remove
572R Series II Pipelayer Hydraulic System Accumulator
446D Backhoe Loader Power Train Solenoid Valve (Transmission) - Remove
AP-800D and BG-230D Asphalt Pavers Machine Systems Paver Ventilation System
988H Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
446D Backhoe Loader Power Train Parking Brake - Remove and Install
988H Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Install
2004/06/28 Special Publications on Multi Terrain Loader Undercarriages Are Now Available {4150}
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Refrigerant Compressor - Remove and Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Refrigerant Condenser - Remove and Install
446D Backhoe Loader Power Train Drive Shaft (Front) - Remove and Install
AP-800D and BG-230D Asphalt Pavers Machine Systems Gear Motor (Ventilation)
797B Off-Highway Truck Engine Components - Rebuild//Replace/Install Reman - 797B LAA Machines Only
446D Backhoe Loader Power Train Drive Shaft (Rear) - Remove and Install
Installation Guide for the Machine Security System on Skid Steer Loaders and Multi Terrain Loaders{7631} Installation Guide for the Machine Security System on Skid Steer Loaders and Multi Terrain Loaders{7631}