Belt - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 180-3033 | Stands | 4 |
B | 5P-3975 | Rubber Lubricant | 1 |
C | 138-7575 | Link Bracket | 1 |
Start By:
- Remove the tow arm. Refer to Disassembly and Assembly, "Tow Arm - Remove and Install".
Show/hide table
Personal injury or death can result from servicing the drive belt. The tractor must be on a hard, level surface before the drive belt is removed or personal injury or death could occur. |
- Remove the bolts and bracket (1) from the machine.
Show/hide table
Illustration 2 g01070486 - Remove bolts (3) and plate (2).
Show/hide table
Illustration 3 g01070487 - Raise the machine and install Tooling (A) under the machine, as shown.
- Purge the track tension system. Refer to Testing and Adjusting, "Accumulator - Test and Charge" in order to release the hydraulic oil pressure in the accumulator.
- Install blocks under belt (4) in order to support the belt.
- If necessary, apply Tooling (B) in order to aid in the removal of tire assembly (5) from belt (4). Remove nuts (6). Attach a suitable lifting device to tire assembly (5) and remove the tire assembly. The weight of tire assembly (5) is approximately
51 kg (112 lb) .Show/hide tableIllustration 4 g01070488 - Remove nuts (7). If necessary, apply Tooling (B) to belt (4) and tire assembly (8) in order to aid in the removal of tire assembly (8) from belt (4).
Show/hide table
Illustration 5 g01070492 - Attach Tooling (C) and a suitable lifting device to tire assembly (8). Remove tire assembly (8) from belt (4). The weight of tire assembly is approximately
110 kg (242 lb) .Show/hide tableIllustration 6 g01070806 - Use a suitable lift truck and remove the blocks from belt (4). Use a suitable lift truck and remove belt (4) from the machine. The weight of the belt is approximately
272 kg (600 lb) .
Show/hide table
Illustration 1 | g01070485 |
Caterpillar Information System:
AP-800D and BG-230D Asphalt Pavers Seat
12M Motor Grader Circle Drive Oil - Change
Electrical System for All Caterpillar Products Circuit Voltage
Electrical System for All Caterpillar Products Electrical Measurement
Electrical System for All Caterpillar Products Ohms Law
Electrical System for All Caterpillar Products Basic Circuit Theory
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Base
8-16B and 10-20B Extend-A-Mat Screed Vibratory Valve - Disassemble
10-20B and 8-16B Extend-A-Mat Screed Heater Element
789C Off-Highway Truck/Tractor Air System and Brakes Service Brakes and Retarder System Leakage - Check
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Lift Cylinder
24H Motor Grader Power Train Air Conditioner
789C Off-Highway Truck/Tractor Air System and Brakes Service Brakes and Retarder System Pressure - Test
8-16B and 10-20B Extend-A-Mat Screed Vibratory Valve - Assemble
14L Motor Grader All Wheel Drive Motor Supply Hose - Inspect/Replace - If Equipped
793C, 793C XQ and 793D Off-Highway Truck Fast Fill Fluid Center Fluids Service System - Test
8-16B and 10-20B Extend-A-Mat Screed Vibratory Group - Remove
R2900G Load Haul Dump 3406E Engine Supplement Engine to Torque Converter and Updrive Gears - Connect
R2900G Load Haul Dump 3406E Engine Supplement Engine from Torque Converter and Updrive Gears - Separate
725 and 730 Articulated Trucks Machine Systems General Information
2004/08/02 Rework of the Ejector Body {6060, 6203, 7271}
725 and 730 Articulated Trucks Machine Systems General Information
770 and 772 Off-Highway Truck Front Wheel Oil - Change
797 Off-Highway Truck Fan Drive Hydraulic System Hydraulic Tank