 | |
| Illustration 1 | g00742699 |
The operator's seat that is provided with this machine is in compliance with the appropriate class of ISO 7096.
Note: Seats may vary. Basic seat operation will be similar.
Always use the seat belt when you operate the machine.
Note: Machines may have a slide assembly that allows the seat to be offset in any of the following directions: right, left, forward and backward.
Seat Adjustment
 | |
| Illustration 2 | g01070292 |
At the beginning of each work period, the seat must be adjusted. Whenever operators are changed, the seat must be adjusted.
The seat must be adjusted so all of the controls are easily reached. The seat must be adjusted so that the service brake foot pedal can be fully depressed.
Move lever (1) to the right in order to release the fore/aft lock. Slide the seat to the desired position. Release the lever in order to lock the seat in the desired position.
In order to raise the seat, loosen bolt (2). Remove cotter pin (3). While you hold the seat, remove locking pin (4). Raise the seat or lower the seat to the desired height. Install locking pin (4) and cotter pin (3). Tighten bolt (2) .
In order to pivot the seat, loosen bolt (2). Pivot the seat to the desired position. Tighten bolt (2) .
Note: Machines may have seats that slide to the sides in order to improve the line of sight to the front of the machine.