Illustration 1 | g00717983 |
This panel is located behind the operator's seat. |
Fuses - Fuses protect the electrical system from damage that is caused by overloaded electrical circuits. Replace the fuse if the element separates. If the fuse of a particular electrical system requires frequent replacement, check the electrical circuit. Repair the electrical circuit, if necessary.
Automatic Retarder Control System (1) - 10 Amp |
Ether Starting Aid (2) - 10 Amp |
Lighter (3) - 10 Amp |
Air Dryer (4) - 10 Amp |
Backup Alarm (5) - 10 Amp |
Transmission Control (6) - 10 Amp |
Payload Measurement System (7) - 10 Amp |
Caterpillar Monitoring System (8) - 10 Amp |
Gauges (9) - 10 Amp |
Traction Control System (10) - 10 Amp |
Illustration 2 | g00717984 |
This panel is located behind the operator's seat. |
Circuit Breaker Reset - Push in the button in order to reset the circuit breaker. If the electrical system is working properly, the button will remain depressed. If the button does not remain depressed, check the appropriate electrical circuit. Repair the electrical circuit, if necessary.
Engine Control (11) - 15 Amp |
Headlights (12) - 15 Amp |
Directional Turn Signals (13) - 15 Amp |
Engine Start (14) - 10 Amp |
Alternator (15) - 105 Amp |
Air Conditioner (16) - 15 Amp |
Secondary Steering (17) - 10 Amp |
Dome Lamp (18) - 15 Amp |