Cab Air Filter - Clean/Replace
Note: Clean the filters more often in dusty conditions. If there is a noticeable reduction in the airflow from the air vents, check the filters.
Show/hide table
| |
| Illustration 1 | g01036552 |
|
The external cab filter is located on the left side of the operator compartment under the steps. | |
Show/hide table
| |
| Illustration 2 | g01036553 |
|
The internal cab filter is located near the left side of the operator seat. | |
- Remove the filter covers.
- Remove the filters.
Note: Raise the operator seat in order to remove the internal cab filter.
- Clean the filters with compressed air. You can also wash the filters with a solution of warm water and of a nonsudsing household detergent.
Note: Do not wash the filters while the filters are installed on the machine. Do not spray water into the cab air filter when you are washing the machine.
- Rinse the filters in clean water. Air dry the filters thoroughly.
- Replace any filters that are worn or damaged.
- Install the filters and replace the covers.
Note: Face the seal toward the parking brake lever when you install the internal cab filter.
Caterpillar Information System:
M325D L MH and M325D MH Material Handlers Machine System Stick Cylinder - Material Handler
267B, 277B and 287B Multi Terrain Loaders Machine Systems Track Drive
M325D L MH and M325D MH Material Handlers Machine System Stick
3508B Engine for Caterpillar Built Machines Radiator and Cooling System - Test
267B, 277B and 287B Multi Terrain Loaders Machine Systems Track Drive
267B, 277B and 287B Multi Terrain Loaders Machine Systems Track Drive
2003/12/22 A New Bracket Is Now Available {1062}
2004/07/26 New Bearings Are Available for the Elimination of the Excessive Play in the Bucket Linkage {6513}
267B, 277B and 287B Multi Terrain Loaders Machine Systems Track Drive
2004/02/02 New Bearings with a Reduced Inside Diameter Are Available for the Elimination of the Excessive Play in the Front Linkage {6460, 6501, 6502, 6516, 6521, 6535, 6536}
3508B Engine for Caterpillar Built Machines Monitoring System Parameters
M325D L MH and M325D MH Material Handlers Machine System Stick
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Circuit Breakers - Reset
3508B Engine for Caterpillar Built Machines Electronic Control System Operation
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System Switch (Two Speed)
247B, 247B2, 257B and 257B2 Multi Terrain Loaders Machine Systems Gear Pump - Disassemble
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems Gear Pump - Assemble
446D Backhoe Loader Axles, Differential and Brakes Axle (Front)
773E Off-Highway Truck and 775E Quarry Truck Automatic Lubrication System Air System
2003/11/24 Special Instruction for Testing Oil Coolers {1378}
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System Switch (Interlock Override)
773E Off-Highway Truck and 775E Quarry Truck Automatic Lubrication System Electrical System
773E Off-Highway Truck and 775E Quarry Truck Automatic Lubrication System Lubrication System
773E Off-Highway Truck and 775E Quarry Truck Automatic Lubrication System General Information