Stick
Show/hide table
 | |
| Illustration 1 | g01040903 |
(A) Boom (B) Stick Cylinder (C) Stick | |
Note: All bores must be free of paint. Coat all bores for pins with lubricant. This includes bucket pin bores and cylinder pin bores.
(1) 234-7666 Pin
- Outside diameter after plating ... 89.74 ± .015 mm (3.53 ± 0.0006 inch)
- Minimum thickness for plating ... 0.005 mm (0.0002 inch)
(2) Use the necessary shims to adjust lateral clearance to a maximum of 0.8 mm (0.0315 inch).
- 133-2426 Shim thickness ... 0.5 mm (0.02 inch)
- 093-0084 Shim thickness ... 1.0 mm (0.04 inch)
- 093-0116 Shim thickness ... 2.0 mm (0.08 inch)
- 093-0084 Shim thickness ... 1.0 mm (0.04 inch)
(3) 235-6123 Sleeve Bearing
- Quantity ... 2
- Outside diameter ... 106.2 ± .013 mm (4.18 ± 0.0005 inch)
- Inside diameter ... 90.27 ± .087 mm (3.55 ± 0.0034 inch)
- Installation depth ... 9.5 ± .5 mm (0.37 ± 0.0197 inch)
- Outside diameter ... 106.2 ± .013 mm (4.18 ± 0.0005 inch)
(4) Lubricate the sealing lip slightly with the lubricant that is being sealed.
(5) Torque for the six bolts ... 100 ± 20 N·m (75.0 ± 15.0 lb ft)
(6) Torque for bolt ... 325 N·m (240 lb ft)
(7) 229-5247 Pin
- Outside diameter after plating ... 99.95 ± .025 mm (3.94 ± 0.0010 inch)
- Minimum thickness for plating ... 0.005 mm (0.0002 inch)
Caterpillar Information System:
3508B Engine for Caterpillar Built Machines Radiator and Cooling System - Test
267B, 277B and 287B Multi Terrain Loaders Machine Systems Track Drive
267B, 277B and 287B Multi Terrain Loaders Machine Systems Track Drive
2003/12/22 A New Bracket Is Now Available {1062}
2004/07/26 New Bearings Are Available for the Elimination of the Excessive Play in the Bucket Linkage {6513}
267B, 277B and 287B Multi Terrain Loaders Machine Systems Track Drive
2004/02/02 New Bearings with a Reduced Inside Diameter Are Available for the Elimination of the Excessive Play in the Front Linkage {6460, 6501, 6502, 6516, 6521, 6535, 6536}
3508B Engine for Caterpillar Built Machines Monitoring System Parameters
M325D L MH and M325D MH Material Handlers Machine System Stick
2003/11/24 A New ISO Drum Mount is Now Used {6605}
CB-214E, CB-224E and CB-225E Vibratory Compactors Vibratory System Motor Support (Vibratory)
3508B Engine for Caterpillar Built Machines High Coolant Temperature
267B, 277B and 287B Multi Terrain Loaders Machine Systems Track Drive
M325D L MH and M325D MH Material Handlers Machine System Stick Cylinder - Material Handler
914G2 and IT14G2 Compact Wheel Loaders Cab Air Filter - Clean/Replace
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Circuit Breakers - Reset
3508B Engine for Caterpillar Built Machines Electronic Control System Operation
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System Switch (Two Speed)
247B, 247B2, 257B and 257B2 Multi Terrain Loaders Machine Systems Gear Pump - Disassemble
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems Gear Pump - Assemble
446D Backhoe Loader Axles, Differential and Brakes Axle (Front)
773E Off-Highway Truck and 775E Quarry Truck Automatic Lubrication System Air System
2003/11/24 Special Instruction for Testing Oil Coolers {1378}
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System Switch (Interlock Override)