IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Caterpillar


Hydraulic and Transmission Oil Cooler - Install

Usage:

IT28G DBT

Installation Procedure


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.

Dispose of all fluids according to local regulations and mandates.




    Illustration 1g00992924

  1. Use two people and position hydraulic oil cooler (8) on the machine. Install nuts (9).


    Illustration 2g00992923

  2. Install nuts (7) on hydraulic oil cooler (8).


    Illustration 3g00992918

  3. Connect hose assemblies (6).


    Illustration 4g00992917

  4. Connect hose assemblies (5).


    Illustration 5g00992916

  5. Position plate (4) and install bolts (3).


    Illustration 6g00992914

  6. Position plate (2) and install bolts (1).

  7. Close both side doors.

Caterpillar Information System:

554, 564 and 574B Forwarders Oil Filter (Power Train Charging System) - Replace
2003/09/08 New Software for Off-Highway Trucks Is Now Available {7620}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Hydraulic and Transmission Oil Cooler - Remove
554, 564 and 574B Forwarders Hydraulic System Oil Level - Check
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Pilot Oil Accumulator (Dead Engine Lower) - Test and Charge
2003/06/09 A New Body Down or Up Switch Is Now Used {7258, 7332}
Upgrade Instructions For The Firmware of the CD550 Display And The MS840 GPS Receiver{7620} Upgrade Instructions For The Firmware of the CD550 Display And The MS840 GPS Receiver{7620}
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Hydraulic System Air - Purge
2003/04/14 There is New Information on the Oil Grade Plug {1000, 1348}
2004/04/19 A Special Instruction, REHS1622 , "Installation and Operation of the Belt Recoil Alarm for the Mobil-Trac System" is Available for Use With the New Recoil Alarm Kit {4198, 7431}
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems System Pressure - Release
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Visual Inspection
584 and 584HD Forwarders Window Wiper - Inspect/Replace
Bench Test Procedure for a 950H, 962H, 966G, 966G Series 2, 966H, 972G, 972G Series 2, and 972H Wheel Loader Transmission and a R1600H Load Haul Dump {3030, 3066, 3073, 3101} Bench Test Procedure for a 950H, 962H, 966G, 966G Series 2, 966H, 972G, 972G Series 2, and 972H Wheel Loader Transmission and a R1600H Load Haul Dump {3030, 3066, 3073, 3101}
CP-533E and CS-533E Vibratory Soil Compactors Propel System Axle
TH350B, TH355B, TH360B and TH460B Telehandlers Circuit Breakers - Test
CP-533E and CS-533E Vibratory Soil Compactors Tire Inflation Pressure Adjustment
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Piston Pump (Implement) Standby Pressure - Test and Adjust
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Piston Pump (Implement) High Pressure Cutoff - Test and Adjust
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Pilot System Pressure - Test and Adjust
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Steering Cylinder Pressure - Test and Adjust
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Lift Cylinder - Isolation and Drift Check
CP-533E and CS-533E Vibratory Soil Compactors Propel System Drum Drive Group
120H and 135H Motor Graders Machine Systems Gear Motor (Hydraulic Fan) - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.