Hydraulic System Oil Level - Check
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Park the machine on a hard, level surface. Engage the parking brake. Place the loader in the stored position.
Show/hide table
Illustration 1 | g00988928 |
Stored position of the loader |
- Open the hood to the hydraulic tank. Check the hydraulic system oil level.
Show/hide table
Illustration 2 | g00970402 |
The hydraulic tank sight gauge is mounted on the hydraulic tank on the left side of the machine. |
- Maintain the oil level to the midpoint of the upper region of the sight gauge. Add oil, if necessary.
Note: Do not overfill the hydraulic tank. Otherwise, hydraulic oil can spill from the top of the tank.
Caterpillar Information System:
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Pilot Oil Accumulator (Dead Engine Lower) - Test and Charge
2003/06/09 A New Body Down or Up Switch Is Now Used {7258, 7332}
Upgrade Instructions For The Firmware of the CD550 Display And The MS840 GPS Receiver{7620} Upgrade Instructions For The Firmware of the CD550 Display And The MS840 GPS Receiver{7620}
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Hydraulic System Air - Purge
2003/04/14 There is New Information on the Oil Grade Plug {1000, 1348}
2004/04/19 A Special Instruction, REHS1622 , "Installation and Operation of the Belt Recoil Alarm for the Mobil-Trac System" is Available for Use With the New Recoil Alarm Kit {4198, 7431}
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems System Pressure - Release
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Visual Inspection
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Flexible Coupling Drive{3030, 3066, 3073} Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Flexible Coupling Drive{3030, 3066, 3073}
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Hydraulic Oil Contamination - Test
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Hydraulic System Troubleshooting
267, 277 and 287 Multi Terrain Loaders Machine Systems Undercarriage Axle and Mounting
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Hydraulic and Transmission Oil Cooler - Remove
2003/09/08 New Software for Off-Highway Trucks Is Now Available {7620}
554, 564 and 574B Forwarders Oil Filter (Power Train Charging System) - Replace
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Hydraulic and Transmission Oil Cooler - Install
584 and 584HD Forwarders Window Wiper - Inspect/Replace
Bench Test Procedure for a 950H, 962H, 966G, 966G Series 2, 966H, 972G, 972G Series 2, and 972H Wheel Loader Transmission and a R1600H Load Haul Dump {3030, 3066, 3073, 3101} Bench Test Procedure for a 950H, 962H, 966G, 966G Series 2, 966H, 972G, 972G Series 2, and 972H Wheel Loader Transmission and a R1600H Load Haul Dump {3030, 3066, 3073, 3101}
CP-533E and CS-533E Vibratory Soil Compactors Propel System Axle
TH350B, TH355B, TH360B and TH460B Telehandlers Circuit Breakers - Test
CP-533E and CS-533E Vibratory Soil Compactors Tire Inflation Pressure Adjustment
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Piston Pump (Implement) Standby Pressure - Test and Adjust
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Piston Pump (Implement) High Pressure Cutoff - Test and Adjust
TK370 Wheel Feller Buncher, TK380 Wheel Feller Buncher, TK371 Industrial Tractor and TK381 Industrial Tractor Machine Systems Pilot System Pressure - Test and Adjust