14H Motor Grader Power Train Caterpillar

Disassembly Procedure

Start By:

1. Remove the transmission oil filter base. Refer to Disassembly and Assembly, "Transmission Oil Filter Base - Remove".

Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.

Show/hide table

Illustration 1	g00925381

1. Remove O-ring seals (1) from filter base (2).
   Show/hide table

   Illustration 2	g00925382

2. Remove plug (3) from filter base (2).
   Show/hide table

   Illustration 3	g00925434

3. Remove plug (4) from filter housing (5).
   Show/hide table

   Illustration 4	g00925435

4. Remove filter housing (5) from filter base (2).
   Show/hide table

   Illustration 5	g00925441

5. Remove filter (6) from filter housing (5).
   Show/hide table

   Illustration 6	g00925445

   Show/hide table

   Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force.

6. Use Tooling (A) in order to remove ring (7) from filter housing (5).
   Show/hide table

   Illustration 7	g00925446

7. Remove retainer (8) and spring (9) from filter housing (5).
   Show/hide table

   Illustration 8	g00925450

8. Remove O-ring seal (10) from filter base (2).
   Show/hide table

   Illustration 9	g00925453

   Show/hide table

   Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force.

9. Remove plug (11) from filter base (2).
   Show/hide table

   Illustration 10	g00925456

10. Remove spool (12) and spring (13) from filter base (2). Remove O-ring seal (14) from plug (11).