Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1P-1855 | Retaining Ring Pliers | 1 |
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Install O-ring seal (14) on plug (11). Install spring (13) and spool (12) on filter base (2).
Show/hide table
Illustration 2 g00925453 - Install plug (11) in filter base (2).
Show/hide table
Illustration 3 g00925450 - Install O-ring seal (10) in filter base (2). Lubricate the seal.
Show/hide table
Illustration 4 g00925446 - Install spring (9) and retainer (8) on filter housing (5).
Show/hide table
Illustration 5 g00925445 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Use Tooling (A) in order to install ring (7) in filter housing (5).
Show/hide table
Illustration 6 g00925441 - Install filter (6) in filter housing (5).
Show/hide table
Illustration 7 g00925435 - Install filter housing (5) in filter base (2).
Show/hide table
Illustration 8 g00925434 - Install plug (4) in filter housing (5).
Show/hide table
Illustration 9 g00925382 - Install plug (3) in filter base (2).
Show/hide table
Illustration 10 g00925381 - Install O-ring seals (1) in filter base (2).
Illustration 1 | g00925456 |
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
End By:
- Install the transmission oil filter base. Refer to Disassembly and Assembly, "Transmission Oil Filter Base - Install".