Transmission Oil Filter Base - Install
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Position transmission oil filter (6) and the base to the original location. Install bolts (5) .
Show/hide table
 | |
| Illustration 1 | g00923387 |
- Position hose assemblies (4) to the original location. Connect quick disconnect (3). Install clamps (2) and install bolts (1) .
Show/hide table
 | |
| Illustration 2 | g00923385 |
- Check the oil level in the transmission. Refer to Operation and Maintenance Manual, SEBU7477, "Transmission and Differential Oil Level - Check" for the correct procedure.
Caterpillar Information System:
14H Motor Grader Power Train Transmission Oil Filter Base - Remove
2003/01/06 Improved Fan Drive Groups Include Components That Help Retain The Axial Force On The Fan Drive Bearings {1359}
533 and 543 Wheel Feller Bunchers Machine Systems Piston Pump (Implement, Pilot, Steering) - Remove
TK711, TK721, TK722 and TK732 Track Feller Bunchers Seat Belt - Inspect
PS-360B Paving Compactor Machine Operation Information
CB-534D and CB-564D Asphalt Compactors Additional Messages
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Power Train
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Torque Converter Stall and Implement Pump Double Stall - Test
C4.4 (Mech) Industrial Engine Basic Engine
2002/09/30 Correction to Specifications , "Final Drive Reducer" {4050}
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks Electronic Display Module
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Water Spray Pump Flow - Test
14H Motor Grader Power Train Transmission Oil Filter Base - Disassemble
14H Motor Grader Power Train Transmission Oil Filter Base - Assemble
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Relief Valve (Charge) - Test and Adjust
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train MID 081 - CID 1327 - FMI 00
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train MID 081 - CID 1327 - FMI 01
2003/05/19 Service Parts Are Now Available for the Carriage Rotate Cylinder {5804, 6408}
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Piston Pump Neutral - Test and Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Steering Wheel Slip - Check
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Conveyor Drive Chain (Auger) - Check and Adjust
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Diagnostic Capabilities
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Conveyor Drive Chain (Drag) - Check and Adjust
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Features of the Drag Conveyor System