Usage:
29Jun2017 |
Before/After | PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PLE601 ON CERTAIN C175 GENERATOR SETS |
|
7606 | PS45528 |
NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS45528" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
TERMINATION DATE |
30Jun2019 |
PROBLEM
Installation of Product Link PLE601 on certain C175 Generator Sets, to improve response to field failures. |
AFFECTED PRODUCT
Model | Identification Number |
C175-16 | WYB00129, 217, 219, 258, 325, 428, 453, 495, 537, 561, 609, 1014-1015, 1017, 1022, 1033, 1040, 1043, 1058, 1063-1064, 1067-1068, 1070, 1077, 1085, 1118, 1125, 1154, 1199, 1267, 1270, 1275, 1297, 1315-1316, 1323, 1331, 1340, 1347, 1353-1355, 1366, 1369, 1377, 1380, 1386, 1388-1390, 1396, 1399-1400, 1414-1416, 1429, 1447-1448, 1486, 1500, 1516, 1519, 1522, 1526-1527, 1529, 1531, 1561, 1583, 1736, 1758, 1760-1761, 1763-1764, 1809, 1827-1829, 1883, 2060, 2063 |
C175-20 | BXR00103, 1006, 1014, 1020-1021, 1037, 1088, 1096-1097, 1105-1106, 1156, 1159, 1885 |
PARTS NEEDED
Qty |
Part Number | Description |
1 | 4256889 | CABLE AS |
1 | 4631181 | INSTL GP-FIELD |
1 | 5161714 | FIRMWARE FILE |
1 | 5392076 | CONFIGURATION FILE FOR PREFIX WYB |
1 | 5392077 | CONFIGURATION FILE FOR PREFIX BXR |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 31% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
ACTION REQUIRED
Install Product Link PLE601. Refer to Special Instruction, REHS8850, "Installation Procedure for the Elite Product LinkTM PLE601, PLE641, and PLE631 Systems". Ensure the PLE601 has been configured with the required files prior to installation at the generator set site. The Firmware File is 516-1714 or latest available. The Configuration File is specific to generator set serial prefix, as follows: 539-2076 or latest available for prefix "WYB" C175-16 Generator Sets 539-2077 or latest available for prefix "BXR" C175-20 Generator Sets |
SERVICE CLAIM ALLOWANCES
0-120 mo |
NOTE: This is a 6.0-hour job | ||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |