Control Module (PEEC)
Usage:
Remove And Install Control Module
1. Disconnect wiring harnesses (1). Disconnect fuel lines (2) Remove three nuts (3). Remove control module (4).
2. Install control module (4). Install three nuts (3). Install fuel lines (2) and tighten the fuel line nuts to 40 ± 7 N·m (30 ± 5 lb.ft.). Connect wiring harnesses (1). Connect J1 to P1, P2 to J2, J3 to P3 and P4 to J4.
NOTE: The control module must be reprogrammed for the factory & customer parameters.
Caterpillar Information System:
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Shut-Off Solenoid
3406B (PEEC) DIESEL TRUCK ENGINE Rack Actuator Package
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Rack Actuator Package
3406B (PEEC) DIESEL TRUCK ENGINE Timing Advance Unit
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Transfer Pump
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Filter and Base
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Priming Pump
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Lines
3406B (PEEC) DIESEL TRUCK ENGINE Air Compressor
3406B (PEEC) DIESEL TRUCK ENGINE Engine Design
3406 (PEEC) Diesel Truck Electrical System 3406 (PEEC) Diesel Truck Electrical System
SYSTEMS OPERATION TESTING & ADJUSTING 3406B (PEEC) DIESEL TR Testing And Adjusting
3406B (PEEC) DIESEL TRUCK ENGINE Personality Module (PEEC)
3406B (PEEC) DIESEL TRUCK ENGINE Wiring Harness Connectors and Contacts (PEEC)
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Pumps
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406B (PEEC) DIESEL TRUCK ENGINE Valve Covers
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Line Adapters
3406B (PEEC) DIESEL TRUCK ENGINE Electric Starting Motor
3406B (PEEC) DIESEL TRUCK ENGINE Turbocharger (S4A)
3406B (PEEC) DIESEL TRUCK ENGINE Water Temperature Regulator And Manifold
3406B (PEEC) DIESEL TRUCK ENGINE Water Temperature Regulator (Ford)
3406B (PEEC) DIESEL TRUCK ENGINE Engine Oil Cooler
3406B (PEEC) DIESEL TRUCK ENGINE Oil Filter And Base