Fuel Priming Pump
Usage:
Remove And Install Fuel Priming Pump
1. Remove two bolts (1), and remove fuel priming pump (2).
2. Inspect the gasket, and install a new gasket if needed.
NOTE: The following steps are for installation of the priming pump.
3. Make sure the gasket is in position for the fuel priming pump.
4. Put fuel priming pump (1) in position on the fuel filter base. Install the two bolts that hold it in place.
Caterpillar Information System:
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Lines
3406B (PEEC) DIESEL TRUCK ENGINE Air Compressor
3406B (PEEC) DIESEL TRUCK ENGINE Engine Design
3406 (PEEC) Diesel Truck Electrical System 3406 (PEEC) Diesel Truck Electrical System
SYSTEMS OPERATION TESTING & ADJUSTING 3406B (PEEC) DIESEL TR Testing And Adjusting
SYSTEMS OPERATION TESTING & ADJUSTING 3406B (PEEC) DIESEL TR Systems Operation
3406B (PEEC) DIESEL TRUCK ENGINE Starter Solenoid
3406B (PEEC) DIESEL TRUCK ENGINE Electric Starter Motor
3406B (PEEC) DIESEL TRUCK ENGINE Regulator
3406B (PEEC) DIESEL TRUCK ENGINE Alternator
3406B (PEEC) DIESEL TRUCK ENGINE Alternator And Compressor Mounting Group
3406B (PEEC) DIESEL TRUCK ENGINE Oil Cooler Bypass Valve
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Filter and Base
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Transfer Pump
3406B (PEEC) DIESEL TRUCK ENGINE Timing Advance Unit
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Rack Actuator Package
3406B (PEEC) DIESEL TRUCK ENGINE Rack Actuator Package
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Shut-Off Solenoid
3406B (PEEC) DIESEL TRUCK ENGINE Control Module (PEEC)
3406B (PEEC) DIESEL TRUCK ENGINE Personality Module (PEEC)
3406B (PEEC) DIESEL TRUCK ENGINE Wiring Harness Connectors and Contacts (PEEC)
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Pumps
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406B (PEEC) DIESEL TRUCK ENGINE Valve Covers