3406B (PEEC) DIESEL TRUCK ENGINE Caterpillar


Fuel Shut-Off Solenoid

Usage:

Remove And Install Shut-Off Solenoid

1. Disconnect wiring harness (2) to shut-off solenoid (1). Remove the bolt from the housing directly behind the shut-off solenoid to provide clearance for easy removal.

2. Use tool (A) to remove shut-off solenoid. Remove the O-ring from the shut-off solenoid.

3. Lubricate the O-ring with engine oil and install on shut-off solenoid (1).

4. Use tool (A) and install solenoid (1). Tighten the solenoid to 55 ± 7 N·m (40 ± 5 lb.ft.). Install the bolt into the housing if removed. Connect wiring harness (2). Connect J11 to P11.

5. Install the connector into the bracket.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.