Electric Starting Motor
Usage:
Remove And Install Electric Starting Motor
1. Disconnect the wires from the starting motor.
2. Fasten a hoist to the starting motor. Remove three bolts (1) that hold the starting motor to flywheel housing. Remove the electric starting motor. The weight of the starting motor is 32 kg (70 lb.).
NOTE: The following steps are for the installation of the electric starting motor.
3. Fasten a hoist, and install the electric starting motor on the flywheel housing. Install the three bolts (1) that hold the starting motor to the flywheel housing.
4. Connect the wires to the starting motor.
Caterpillar Information System:
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Line Adapters
3406B (PEEC) DIESEL TRUCK ENGINE Valve Covers
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Pumps
3406B (PEEC) DIESEL TRUCK ENGINE Wiring Harness Connectors and Contacts (PEEC)
3406B (PEEC) DIESEL TRUCK ENGINE Personality Module (PEEC)
3406B (PEEC) DIESEL TRUCK ENGINE Control Module (PEEC)
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Shut-Off Solenoid
3406B (PEEC) DIESEL TRUCK ENGINE Rack Actuator Package
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Rack Actuator Package
3406B (PEEC) DIESEL TRUCK ENGINE Timing Advance Unit
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Transfer Pump
3406B (PEEC) DIESEL TRUCK ENGINE Turbocharger (S4A)
3406B (PEEC) DIESEL TRUCK ENGINE Water Temperature Regulator And Manifold
3406B (PEEC) DIESEL TRUCK ENGINE Water Temperature Regulator (Ford)
3406B (PEEC) DIESEL TRUCK ENGINE Engine Oil Cooler
3406B (PEEC) DIESEL TRUCK ENGINE Oil Filter And Base
3406B (PEEC) DIESEL TRUCK ENGINE Oil Filter Base
3406B (PEEC) DIESEL TRUCK ENGINE Exhaust Manifold
3406B (PEEC) DIESEL TRUCK ENGINE Water Pump
3406B (PEEC) DIESEL TRUCK ENGINE Fan Drive
3406B (PEEC) DIESEL TRUCK ENGINE Engine Front Support
3406B (PEEC) DIESEL TRUCK ENGINE Vibration Damper And Pulley
3406B (PEEC) DIESEL TRUCK ENGINE Timing Gear Cover