Usage:
Start By:
a. remove turbocharger
1. Loosen clamp (1) that holds the breather tube to the breather.
2. Remove bolt (4) that holds the breather tube to the engine, and move the breather tube away from the exhaust manifold.
3. Remove the nuts and spacers (2), and remove exhaust manifold (3).
4. Remove the gaskets from the studs.
NOTE: The following steps are for the installation of the exhaust manifold.
5. Put 5P3931 Anti-Seize Compound on the studs.
6. Put the gaskets and exhaust manifold (3) in position on the studs, and install spacers (2) and nuts.
7. Tighten the nuts in the number sequence shown to a torque of 52 ± 7 N*m (38 ± 5 lb.ft.).
8. Put breather tube (3) in position on the breather, and tighten clamp (1). Install bolt (4) that holds the breather tube to the cylinder block.
End By:
a. install turbocharger