Usage:
1. Remove plug (1), and drain the oil, from the oil filter base.
2. Use tool (A), and remove oil filter (2).
3. Remove four bolts (5) that hold the oil filter base to the oil cooler and four bolts (4) that hold the oil filter base to the cylinder block.
4. Disconnect turbocharger oil line (3).
5. Remove oil filter base (6).
NOTE: The following steps are for the installation of the oil filter and base.
6. Make sure the O-ring seals are in place on the oil filter base, and put oil filter base (6) in position on the oil cooler and the cylinder block.
7. Install four bolts (4) that hold the oil filter base to the cylinder block.
8. Install for bolts (5) that hold the oil filter base to the oil cooler.
9. Connect turbocharger oil line (3).
10. Install the oil filter on the base. Follow the installation procedure on the oil filter.
11. Install plug (1).
12. Check the engine oil level. See Maintenance Guide.