Improved Turbocharger Outlet Gasket
Usage:
3606 (8RB),
3608 (6MC),
3612 (9RC),
3616 (1PD) Industrial Engines
Description of Change: The gasket between the turbocharger exhaust outlet and the exhaust stack has been improved. This change will improve the sealing ability of the gasket and eliminate gasket burn-out at the exhaust bellows joint. See the illustration for location of gasket.
Location of gasket.
Adaptable To: The part number of the improved gasket has not changed. The affected part numbers are 9Y1616 Gasket [530.0 mm (20.87") diameter] and 9Y1717 Gasket [430.0 mm (16.93") diameter].
Caterpillar Information System:
1989/10/01 Fuel Injector Reference For 3500 Family of Engines
1989/10/01 New Fuel Injector Assemblies Used
1989/10/01 Setting The Governor Load Stop Output Dimension For More Than 9.00 mm
1989/10/01 New Service Tools Available
1989/09/01 List of Service Publications
1989/09/01 Procedure To Wash Turbochargers On Engines Powered By Residual Fuel
1989/09/01 New Gasket Used On Oil Regulator Housing
1989/09/01 New Seal Group Used In Water Pump Group
1989/09/01 Spindle In Centrifugal Lube Filter Group Now Serviced As Part Of Body Assembly
1989/09/01 New Collar Used In Fuel Injection Control Groups
1989/09/01 Additional Clamp Added To Aftercooler Water Line
1989/09/01 New Design Alternator Belt Used
1989/10/01 Improved Support Assembly Used In Water Lines Group
1989/10/01 Cleaning Instructions For Intake Air Filters In Silencer Group
1989/11/01 Engine Coolant Can Be Recycled
1989/11/01 New Service Tools Available
1989/11/01 Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool
1989/11/01 Hand Tool List For 3114 And 3116 Engines
1989/11/01 Two Remote Instrument Panels Available: Conventional and EMCP
1989/11/01 New Connecting Rod and Main Bearing Kits Available
1989/11/01 New MG507 And MG507A Marine Gear Groups; New Marine Transmission Mounting Group
1989/11/01 How to Prevent Exhaust Valve Failures on D348 Engines
1989/11/01 Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section.
1989/11/01 New Crankshaft Counterweight Bolt And Washer Used