R1700G LH.D. MACHINE SYSTEMS Caterpillar

NOTE: Check the condition of all O-ring seals and of all parts. If any components are worn or damaged, use new parts for replacement.

1. Put selector and pressure control valve assembly (1) in position on the rear frame. Install the two bolts and the washers that hold selector and pressure control valve assembly (1) to the rear frame.

2. Connect the six hose assemblies to selector and pressure control valve assembly (1).

3. Fill the hydraulic tank with oil to the correct level. Refer to Operation and Maintenance Manual for the machine that is being serviced.

End By:

a. Remove the steering frame lock pin. Refer to Disassembly and Assembly, "Steering Frame Lock Pin - Remove and Install" for the machine that is being serviced.