Service Operation Using Service Tool
The service tool is used to communicate with the ECM for the following information:
- display and control of code
- programming
- management
- diagnostics
To protect the machine properly, the service tool requires a factory password or master access level key, before modifications can be made to the MSS.
Caterpillar Information System:
Machine Security System (MSS3i) Integrated Protected Functions
Machine Security System (MSS3i) Integrated Diagnostic Operation
Machine Security System (MSS3i) Integrated Scheduled Access - "Security System Bypass Times"
Machine Security System (MSS3i) Integrated Key Information
120 and 120 AWD Motor Grader Engine Shutdown Switch
3512C Generator Set Engine Engine Oil Filter Housing - Disassemble
Machine Security System (MSS3i) Integrated Operation of Status Indicator
Machine Security System (MSS3i) Integrated System Overview
120 and 120 AWD Motor Grader Battery Disconnect Switch
Machine Security System (MSS3i) Integrated General Information
120 and 120 AWD Motor Grader Mirror - If Equipped
Energy Storage System Cell Level Faults
Machine Security System (MSS3i) Integrated Electronic Control Module (ECM)
Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156} Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
Machine Security System (MSS3i) Integrated System Components
Machine Security System (MSS3i) Integrated Data Link
Machine Security System (MSS3i) Integrated General Information
Machine Security System (MSS3i) Integrated Troubleshooting
Machine Security System (MSS3i) Integrated Key - Program
120 and 120 AWD Motor Grader Stopping the Engine if an Electrical Malfunction Occurs
Machine Security System (MSS3i) Integrated Scheduled Access - Program - Security System Bypass
Machine Security System (MSS3i) Integrated Time - Set
Machine Security System (MSS3i) Integrated Factory Password - Obtain
Machine Security System (MSS3i) Integrated Configuration