Exhaust Combustion (ARD)
Show/hide table
Illustration 1 | g03534597 |
Show/hide table
Specification for 418-4590 Exhaust Combustion and Mounting Gp | |||
Item | Qty | Part | Specification Description |
1 | 4 | 199-2267 Bolt | Before assembly, lubricate the threads and the bearing surfaces with Loctite Nickel Anti-Seize. |
2 | 2 | 5C-2537 Bolt | Before assembly, lubricate the threads and the bearing surfaces with Loctite Nickel Anti-Seize. |
3 | 2 | 348-3426 Bolt | Before assembly, lubricate the threads and the bearing surfaces with Loctite Nickel Anti-Seize. |
Show/hide table
Illustration 2 | g03534598 |
355-0883 Exhaust Combustion Gp |
Show/hide table
Item | Qty | Part | Specification Description |
4 | 6 | 293-4967 Taperlock Stud | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize.
Torque to |
5 | 6 | 291-5204 Locknut | Use the following procedure to tighten the locknuts:
1. Tighten the locknuts to 2. Tighten the locknuts to 3. Re- tighten the locknuts to |
6 | 1 | 295-3099 Spark Plug | Torque to |
Show/hide table
Illustration 3 | g03534599 |
433-3675 Combustion Head Gp |
Show/hide table
Item | Qty | Part | Specification Description |
7 | 2 | 342-1471 Connector | Torque to |
8 | 1 | 353-3311 Filter Adapter | Torque to |
9 | 3 | 344-7833 Bolt | Use the following procedure to tighten the bolts:
1. Torque to 2. Torque to 3. Torque to |
10 | 1 | 342-1466 O-Ring Seal | Before assembly, lubricate the seal with clean oil. |
11 | 1 | 342-1467 O-Ring Seal | Before assembly, lubricate the seal with clean oil. |
12 | 1 | 342-1468 O-Ring Seal | Before assembly, lubricate the seal with clean oil. |
13 | 2 | 8T-9405 Bolt | Torque to |
Caterpillar Information System:
Advisor Is Unresponsive Due to Longer Power Cycling Time{7490} Advisor Is Unresponsive Due to Longer Power Cycling Time{7490}
G3600 A4 Engines Exhaust Temperature Is Low
G3600 A4 Engines Exhaust Temperature Is High
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Fuel Lines
C13, C15, and C18 Tier 4 Final Engines Radiator
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
2013/11/25 Temperature Display Issue Resolved in the Latest Version of Caterpillar Electronic Technician (Cat ® ET) for G3600 Engines {0785, 1901}
G3600 A4 Engines Oil Pressure Is High
390F MHPU Mobile Hydraulic Power Unit Storage Box
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Signal (PWM) - Test
C9.3 Tier 4 Final Engines Dust Ejector
G3600 A4 Engines Alternator Problem - Charging Problem and/or Noisy Operation
New IGBT Driver For UPSB505 {1401, 4480} New IGBT Driver For UPSB505 {1401, 4480}
G3600 A4 Engines Electrical Power Supply - Test
G3600 A4 Engines Fuel Temperature Is High
3516C Marine Engine Product Lifting
3500E Marine Engines Alarms and Shutoffs
2013/12/18 New Main Rotor, Bearing Sleeve, Bearing Retainer Bar, And Cable Lugs Are Now Available For Gas Generator Sets Packaged With 2650 Frame High Voltage Generators {4459, 5258}
HI315B Injector System Priming{1256, 1258} HI315B Injector System Priming{1256, 1258}
2014/02/21 New Software Is Used For Certain C280 Marine Engines {1902, 1920}
Wear on Swash Plate Support in Side By Side Pumps on Certain Excavators{5070} Wear on Swash Plate Support in Side By Side Pumps on Certain Excavators{5070}
C9.3 Tier 4 Final Engines Ventilation Duct (Clean Emissions Module)