Cylinder Block
Show/hide table
图 1 | g03366305 |
Show/hide table
358-6883 缸体总成的技术规格 | |||
项目 | 数量 | 零件 | 技术规格说明 |
1 | 1 | 227-1204 垫片 | 在装配过程中,垫板 (2) 的底部、缸体的顶部和垫片 (1) 的两个表面上绝不能有燃油、机油、水、粘合剂、组装固定胶或其他任何污染物。 |
2 | 1 | 6I-4421 垫板 | 垫板的最大厚度为 |
A | 1 | 4N-1650 定位销 | 安装前,将绿色 Loctite 609 涂覆到定位销上。
定位销伸出缸体顶面的长度为 |
B | 1 | 1S-9540 定位销 | 定位销伸出缸体顶面的长度为 |
C | 1 | 6I-1055 定位销 | 安装前,将绿色 Loctite 609 涂覆到定位销上。
定位销伸出缸体顶面的长度为 |
D | 4 | 4N-0683 定位销 | 定位销伸出缸体端部的长度为 |
Show/hide table
图 2 | g03366308 |
Show/hide table
项目 | 数量 | 零件 | 技术规格说明 |
3 | 6 | 155-0809 缸套密封件 | 装配前,在插入缸套前用 5P-3975 橡胶润滑剂润滑缸套孔表面和橡胶密封件。 |
4 | 12 | 155-2793 缸套密封件 | 装配前,在插入缸套前用 5P-3975 橡胶润滑剂润滑缸套孔表面和橡胶密封件。 |
5 | 14 | 3P-1323 轴承盖螺栓 | 按照以下步骤拧紧主轴承盖螺栓: 1. 将清洁的发动机机油涂抹在螺栓的螺纹上。 2. 将凸舌端的螺栓拧紧至扭矩为 3. 将凸舌端对面一端的螺栓拧紧至扭矩为 4. 将凸舌端对面一端的螺栓再拧紧 120 ± 5 度。 4. 将凸舌端的螺栓再拧紧 120 ± 5 度。 对每个螺栓重复此步骤。 |
E | - | - | 从曲轴轴承孔中心线到新缸体顶部的尺寸为 |
F | - | - | 缸体中用于安装主轴承的孔径为 |
G | - | - | 主轴承盖的宽度为 缸体上用于安装主轴承盖的宽度为 |
H | - | - | 从曲轴轴承孔中心线到缸体油底壳油轨底部的尺寸为 |
Caterpillar Information System:
G3516 Engines Engine Oil Pan
C9.3 Industrial Engine Flywheel Housing
C9.3 Tier 4 Final Engines Flywheel Housing
3500B Industrial Engines Air Starting Motor
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
C4.4 Generator Sets Product Description
2013/04/25 A New Air Cleaner Gp Is Available for Certain 3512C Engines {1051, 1054}
C7.1 Generator Sets Product Installation
TH48-E80 Petroleum Transmission Power Train Electronic Control System Event Codes
C7.1 Marine Engine Check Valve - Remove and Install
G3512H and G3516H Generator Set Engines Valve Mechanism Cover - Remove and Install
G3512H and G3516H Generator Set Engines Engine Oil Pan - Assemble
G3500 Engines Alternator Mounting
C13 Tier 4 Final Engines Engine to Transmission Adapter
3500 Engines Air Lines
C11 and C13 Engines Engine Oil Filter Base
374F Excavator System Pressure Release
C32 Marine Generator Set Maintenance Interval Schedule
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Gear (Bull) - Remove and Install
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Pinion Shaft - Remove and Install
C32 Marine Generator Set Fumes Disposal Filter Element - Replace
C32 Marine Generator Set Fumes Disposal Filter Service Indicator - Check
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Crosshead - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Diagnostic Trouble Codes