Alternator Mounting
Show/hide table
| |
| Illustration 1 | g03366316 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | - | - | Tighten the pulley retaining nut to |
| 2 | 2 | 2J-3506 Full Nut | Torque to |
| 3 | 1 | 141-7116 Serpentine Belt | Adjust the belt tension of the serpentine belt according to the 197-9087 Tension Chart. |
| 4 | 1 | 7E-4839 Pulley | Maximum misalignment between pulley assembly (5) and pulley (4) should not exceed 0.4 degrees. |
| 5 | 1 | 300-8570 Pulley As | |
| 6 | 1 | 235-2484 Lip Type Seal | Lubricate the sealing lip of the lip type seal lightly with the lubricant that is being sealed. |
Show/hide table
| Size of Belt | Width of Belt | Gauge Reading | Belt Tension (Frequency)
“New” |
Belt Tension (Frequency)
“Used” |
|
| Belt Tension (Force)
“New” |
Belt Tension (Force)
“Used” |
||||
| 8PK | |
|
|
149 ± 3 HZ | 134 ± 3 HZ |
| Do not use the belt tension chart for belts with tensioners that are spring loaded. | |||||
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
G3516 Engines Engine Oil Pan
C9.3 Industrial Engine Flywheel Housing
C9.3 Tier 4 Final Engines Flywheel Housing
3500B Industrial Engines Air Starting Motor
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
C4.4 Generator Sets Product Description
2013/04/25 A New Air Cleaner Gp Is Available for Certain 3512C Engines {1051, 1054}
C7.1 Generator Sets Product Installation
TH48-E80 Petroleum Transmission Power Train Electronic Control System Event Codes
C7.1 Marine Engine Check Valve - Remove and Install
G3512H and G3516H Generator Set Engines Valve Mechanism Cover - Remove and Install
C13 Tier 4 Final Engines Engine to Transmission Adapter
3500 Engines Air Lines
C11 and C13 Engines Engine Oil Filter Base
374F Excavator System Pressure Release
C32 Marine Generator Set Maintenance Interval Schedule
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Gear (Bull) - Remove and Install
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Pinion Shaft - Remove and Install
C32 Marine Generator Set Fumes Disposal Filter Element - Replace
C32 Marine Generator Set Fumes Disposal Filter Service Indicator - Check
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Crosshead - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Diagnostic Trouble Codes
C15 and C18 Industrial Engines Flywheel Housing