G3516 Engines Caterpillar


Engine Oil Pan

Usage:

G3516 AL7


Illustration 1g03366304

Table 1
Specification for 434-4253 Oil Pan Gp 
Item  Qty  Part  Specification Description 
As required, apply Loctite RTV Silicone Clear to the joints of the gasket. 
3P-0654 O-Ring Seal  Before assembly, apply 1P-0808 Multipurpose Grease in order to lubricate the bores. 
7X-1547 O-Ring Seal  Before assembly, apply 1P-0808 Multipurpose Grease in order to lubricate the bores. 
0S-1590 Bolt  In order to prevent stress on the tube assembly (6), use the following tightening procedure during assembly:

1. Tighten two bolts (5) to 47 ± 9 N·m (35 ± 7 lb ft).
2. Then, tighten two bolts (4) to 47 ± 9 N·m (35 ± 7 lb ft)
0S-1588 Bolt 
4B-2363 Oil Drain Plug  Torque to 145 ± 15 N·m (107 ± 11 lb ft)

Caterpillar Information System:

C9.3 Industrial Engine Flywheel Housing
C9.3 Tier 4 Final Engines Flywheel Housing
3500B Industrial Engines Air Starting Motor
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
C4.4 Generator Sets Product Description
2013/04/25 A New Air Cleaner Gp Is Available for Certain 3512C Engines {1051, 1054}
C7.1 Generator Sets Product Installation
TH48-E80 Petroleum Transmission Power Train Electronic Control System Event Codes
C7.1 Marine Engine Check Valve - Remove and Install
G3512H and G3516H Generator Set Engines Valve Mechanism Cover - Remove and Install
G3512H and G3516H Generator Set Engines Engine Oil Pan - Assemble
2013/07/22 A New Oil Mist Detector Mounting Bracket Is Used With Certain 3516C Engines {1336}
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
G3500 Engines Alternator Mounting
C13 Tier 4 Final Engines Engine to Transmission Adapter
3500 Engines Air Lines
C11 and C13 Engines Engine Oil Filter Base
374F Excavator System Pressure Release
C32 Marine Generator Set Maintenance Interval Schedule
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Gear (Bull) - Remove and Install
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Pinion Shaft - Remove and Install
C32 Marine Generator Set Fumes Disposal Filter Element - Replace
C32 Marine Generator Set Fumes Disposal Filter Service Indicator - Check
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Crosshead - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.