2011/08/23 Caterpillar


A New Electronic Hour Meter Is Now Used for Certain Marine Engines {7478}

Usage:

3196 2XR
Marine Engine:
3176C MARINE (S/N: 6BW1-UP)
3196 MARINE (S/N: 2XR1-UP)
C-12 MARINE (S/N: K1M1-UP; 9HP1-UP)
C12 MARINE (S/N: NFL1-UP; C1Z1-UP)

Description of Change: A new service meter kit is now used for the engines that are listed above. The new hour meter has improved torque retention and is more durable.

Adaptable To: The new 362-0288 Service Meter Kit is a direct replacement for the former mechanical 9W-1494 Service Meter Kit on the 124-5775 Service Meter Gp and the 163-7361 Service Meter Gp. The new 362-0288 Service Meter Kit is adaptable back to first production of the engines listed above.

Table 1
Effective Serial Numbers    
S/N:K1M00185-UP    
S/N:NFL01885-UP    
This change is effective from the factory on the serial numbers that are listed in Table 1.

Installation Instructions




Illustration 1g02709102

(1) "+" Connection

(2) "-" Connection

(3) "S" Connection

  1. Remove the existing hour meter.

  1. Connect the appropriate leads from the existing wiring harness to connections (1) and (2) on the rear of the meter. Refer to the appropriate engine electrical schematic in the Service Information System (SIS) for additional details.

    Note: Connection (3) on the new hour meter is not used.

  1. Install meter in engine mounting location.

Caterpillar Information System:

C1.5 and C2.2 Industrial Engines Glow Plugs (ARD Combustion) - Replace
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280} Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
C32 Marine Engine Overhaul (Top End)
CG137-08 and CG137-12 Generator Sets Vibration Damper and Pulley
CG137-08 and CG137-12 Generator Sets Air Cleaner
Bench Test Procedure for a TA19-4WD Agricultural Tractor Transmission{3030, 3073, 3139} Bench Test Procedure for a TA19-4WD Agricultural Tractor Transmission{3030, 3073, 3139}
G3500H 60Hz Generator Sets Coolant Temperature Regulator - Replace
G3500H 50Hz Generator Sets Rotating Rectifier - Check
G3516 Petroleum Engine Engine Oil Temperature Regulator - Replace
2011/09/23 New Software Is Now Used to Improve the Programmable Torque Limiting Parameters on Certain C32 Marine Engines {1901, 1920}
3516C Generator Set Engines Liquid Level Sensor (DEF)
3516C Generator Set Engines Magnetic Switch (DEF Tank Heater)
3516C Generator Set Engines Exhaust Temperature Is High
3516C Generator Set Engines Fuel Pressure Is Low
3516C Generator Set Engines Oil Filter Differential Pressure Problem
3516C Generator Set Engines Prelubrication Pump Problem
3516C Generator Set Engines Pressure Sensor - Calibrate
3000 Frame SR5 Electric Power Generation General Information
3000 Frame SR5 Electric Power Generation Component Descriptions
CG137-08 and CG137-12 Generator Sets Crankshaft
3516C Generator Sets Fire Prevention and Explosion Prevention
C1.5 and C2.2 Industrial Engines Fire Prevention and Explosion Prevention
C15 Engines for Combat and Tactical Vehicles Engine Valve Lash - Inspect/Adjust
Loose Bolts on Camshaft Idler Gear Shafts for C175 Engines{1206} Loose Bolts on Camshaft Idler Gear Shafts for C175 Engines{1206}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.