Magnetic Switch (DEF Tank Heater)
Show/hide table
Illustration 1 | g02702657 |
Show/hide table
Specification for 258-1543 Magnetic Switch Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 6V-8378 Nut | Torque to |
2 | 2 | 6V-8186 Full Nut | Torque to |
- | - | - | Operating voltage is 24 VDC. |
- | - | - | Maximum pull-in voltage at |
- | - | - | Maximum hold-in voltage at |
- | - | - | Resistance at |
Caterpillar Information System:
Installation Procedure for Improved Jacket Water Heater on Certain C27 Generator Sets{1383} Installation Procedure for Improved Jacket Water Heater on Certain C27 Generator Sets{1383}
C15 Engines for Combat and Tactical Vehicles Electronic Unit Injector - Adjust
CG137-08 and CG137-12 Generator Sets Turbocharger
TH55FT-E70 and TH55FT-E90 Transmissions Daily Inspection
CG137-08 and CG137-12 Engines Crankshaft - Remove and Install
CG137-08 and CG137-12 Engines Crankshaft Main Bearings - Remove and Install
CG137-08 and CG137-12 Engines Camshaft Bearings - Remove and Install
371-1079 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100} 371-1079 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
CG137-08 and CG137-12 Engines Camshaft - Remove and Install
CG137-08 and CG137-12 Engines Cylinder Liner - Remove and Install
CG137-08 and CG137-12 Engines Pistons and Connecting Rods - Remove and Install
CG137-08 and CG137-12 Engines Cylinder Head - Remove and Install - G3412B
3516C Generator Set Engines Liquid Level Sensor (DEF)
2011/09/23 New Software Is Now Used to Improve the Programmable Torque Limiting Parameters on Certain C32 Marine Engines {1901, 1920}
G3516 Petroleum Engine Engine Oil Temperature Regulator - Replace
G3500H 50Hz Generator Sets Rotating Rectifier - Check
G3500H 60Hz Generator Sets Coolant Temperature Regulator - Replace
Bench Test Procedure for a TA19-4WD Agricultural Tractor Transmission{3030, 3073, 3139} Bench Test Procedure for a TA19-4WD Agricultural Tractor Transmission{3030, 3073, 3139}
CG137-08 and CG137-12 Generator Sets Air Cleaner
CG137-08 and CG137-12 Generator Sets Vibration Damper and Pulley
C32 Marine Engine Overhaul (Top End)
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280} Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
C1.5 and C2.2 Industrial Engines Glow Plugs (ARD Combustion) - Replace
2011/08/23 A New Electronic Hour Meter Is Now Used for Certain Marine Engines {7478}