854K Wheel Dozer and 992K Wheel Loader Machine Systems Caterpillar


Tilt Control Valve (Dual) - Remove and Install

Usage:

854K H8M

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
138-7575  Link Bracket 

Start By:

  1. Connect the steering frame lock.

  2. Release the hydraulic system pressure.

------ WARNING! ------

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.


  1. Refer to Operation and Maintenance Manual, "Hydraulic System Oil (Implement) (Hydraulic Fan) - Change" for the correct draining and filling procedures.


    Illustration 1g01470340

  2. Open access door (1) on the top of the front frame.


    Illustration 2g01479072

  3. Remove cover assembly (2) from the left side of the front frame.


    Illustration 3g02589176

  4. Disconnect hose assemblies (4) from tilt control valve (3).

  5. Disconnect harness assembly (5).

  6. Disconnect hose assemblies (6).


    Illustration 4g02589177

  7. Attach Tooling (A) and a suitable lifting device to tilt control valve (3). The weight of tilt control valve (3) is approximately 30 kg (65 lb).

  8. Remove three bolts (7) (not shown). Use Tooling (A) and the suitable lifting device in order to carefully remove tilt control valve (3).

Installation Procedure

  1. Install tilt control valve (3) in the reverse order of removal.

Caterpillar Information System:

621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Combustion Head - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Diesel Particulate Filter - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Inlet Module (Catalyst) - Remove and Install - Tractor
854K Wheel Dozer and 992K Wheel Loader Machine Systems Main Control Valve - Assemble
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Electronic Control (ARD Combustion Air) - Remove and Install - Tractor
D6N Track-Type Tractor MID 039 - CID 2500 - FMI 08
D6N Track-Type Tractor MID 039 - CID 0590 - FMI 02
D6N Track-Type Tractor MID 039 - CID 3527 - FMI 12
854K Wheel Dozer and 992K Wheel Loader Machine Systems Main Control Valve - Disassemble
994H Wheel Loader Engine Supplement Refrigerant Compressor - Install
994H Wheel Loader Engine Supplement Refrigerant Compressor - Remove
D6N Track-Type Tractor Power Train Brake - Calibrate
XQ400 Power Module Coolant Temperature Regulator - Replace
980K Wheel Loader Power Train Torque Converter (Lockup)
CG137-08 and CG137-12 Engines Coolant Sample (Level 1) - Obtain
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Clean Emissions Module - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Refrigerant Compressor - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Fumes Disposal Filter - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Relay (ARD Nozzle Heater) - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Fuel Manifold (ARD) - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Solenoid Valve (ARD Main Fuel) - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Solenoid Valve (ARD Pilot Fuel) - Remove and Install - Tractor
3412 Generator Set Engines Water Pump
2011/06/02 An Improved Hydraulic Pump Support is Now Used on AD45B and AD55 Underground Articulated Trucks {5073}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.