Front Cover - Remove
Start By:
- Remove the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Remove".
- Remove the fan drive mounting group. Refer to Disassembly and Assembly, "Fan Drive Mounting Group - Remove and Install".
- Remove the crankshaft front seal. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove".
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (1).
- Remove bolt (4).
- Remove studs (2).
- Remove cover (3) and the gasket.
Show/hide table
| |
| Illustration 1 | g01292465 |
Caterpillar Information System:
C13 Engine Crankshaft Front Seal - Install
C13 Engine Crankshaft Front Seal - Remove
C13 Engine Rear Power Take-Off (RPTO) - Install
C7 On-highway Engine Diesel Particulate Filter
C13 Engine Rear Power Take-Off (RPTO) - Remove
C13 Engine Flywheel Housing - Remove and Install
C13 Engine Flywheel - Install
C13 Engine Flywheel - Remove
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562} Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
C13 Engine Water Temperature Regulator - Remove and Install
C13 Engine Water Pump - Install
C13 Engine Water Pump - Remove
C13 Engine Front Cover - Install
C13 Engine Gear Group (Front) - Remove
C15 and C18 Industrial Engines Combustion Head - Remove and Install
C13 Engine Gear Group (Front) - Install
C13 Engine Housing (Front) - Remove
C7 On-highway Engine Diesel Particulate Filter Temperature and Pressure Sensor
C13 Engine Housing (Front) - Install
789D, 793F, and 797F Off-Highway Truck Monitoring System Charging System
2009/04/20 An Improved Exhaust Bellows Assembly Is Used on 3500HD Locomotive Engines {1052, 1053}
C13 Engine Accessory Drive - Remove
C13 Engine Accessory Drive - Install
C13 Engine Valve Mechanism Cover - Remove and Install