Diesel Particulate Filter
Show/hide table
 | |
| Illustration 1 | g01884415 |
(1) Torque for two clamps ... 11.3 ± 1.2 N·m (100 ± 11 lb in)
(2) Torque for two straps ... 8.5 ± 1.2 N·m (75 ± 11 lb in)
(3) Apply 4C-5599 Anti-Seize Compound to the bottom three threads of temperature probe.
Caterpillar Information System:
C13 Engine Rear Power Take-Off (RPTO) - Remove
C13 Engine Flywheel Housing - Remove and Install
C13 Engine Flywheel - Install
C13 Engine Flywheel - Remove
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562} Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
C13 Engine Water Temperature Regulator - Remove and Install
C13 Engine Water Pump - Install
C13 Engine Water Pump - Remove
3512C Engine for 785D Off-Highway Truck/Tractors Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
C13 Engine Engine Oil Pump - Install
C13 Engine Engine Oil Pump - Assemble
C13 Engine Rear Power Take-Off (RPTO) - Install
C13 Engine Crankshaft Front Seal - Remove
C13 Engine Crankshaft Front Seal - Install
C13 Engine Front Cover - Remove
C13 Engine Front Cover - Install
C13 Engine Gear Group (Front) - Remove
C15 and C18 Industrial Engines Combustion Head - Remove and Install
C13 Engine Gear Group (Front) - Install
C13 Engine Housing (Front) - Remove
C7 On-highway Engine Diesel Particulate Filter Temperature and Pressure Sensor
C13 Engine Housing (Front) - Install
789D, 793F, and 797F Off-Highway Truck Monitoring System Charging System