New Screws Are Now Used on the Front Housing Cover {1151, 1166, 7553}
- Industrial Engine:
- C-15 (S/N: BEM1-UP)
- Marine Engine:
- C18 (S/N: CKH1-UP)
- C15 (S/N: JRE1-UP)
- C18 (S/N: WJH1-UP)
Description of Change: New improved bolts that include threadlock are now used on the front housing cover of the engines that are listed above.
Adaptable To: The new 297-1813 Head Screw is a direct replacement for the 174-7462 Screw. The 297-1813 Head Screw is used on all engines that are listed above with the 209-3569 Front Housing Cover Gp. The new 297-1813 Head Screw is adaptable back to the first production of the above listed engines.
Show/hide table
Serial Number Effectivity     |
S/N:BEM07057-UP     |
S/N:CKH02528-UP     |
S/N:JRE02963-UP     |
S/N:WJH01787-UP     |
Before a used 297-1813 Head Screw is reinstalled, thoroughly clean the threads. Then apply 9S-3263 Thread Lock Compound before installing the screw.
Caterpillar Information System:
C175-16 and C175-20 Generator Set Engines Electrical Power Supply - Test
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Stick - 3.9 m (12.80 ft)
345D, 349D and 349D2 Excavator Machine System Specifications Boom Cylinder Lines
345C Excavator Machine System Specifications Boom - 7.4 m (24.28 ft)
Procedure to Check the CGI (Clean Gas Induction) Cooler for Internal Leaks{105P} Procedure to Check the CGI (Clean Gas Induction) Cooler for Internal Leaks{105P}
C32 Marine Engine Diagnostic Flash Code Retrieval
C32 Marine Engine Configuration Parameters
349F and 352F Excavators Machine System Specifications Swing Cushion Valve with Fine Swing Solenoid Valve
C175-16 and C175-20 Generator Set Engines Sensor Signal (Analog, Active) - Test
C175-16 and C175-20 Generator Set Engines Starting - Test
2008/03/17 A New Starter Solenoid is Now Available {1467}
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine Systems Swing Drive
TH55FT-E70 and TH55FT-E90 Transmissions Power Train Electronic Control System Warm-Up Assist Function
3054B Industrial Engine Balancer - Remove
2008/04/01 A New Fuel Pressure Regulator Is Now Used {1715}
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0718 - FMI 14
345D, 349D and 349D2 Excavator Machine System Specifications Bucket Cylinder Lines
C4.2 and C6.4 Engines for Caterpillar Built Machines Fuel Pressure Sensor
793F Off-Highway Truck Lowering the Body with Engine Stopped
C13T-TH35 and C15T-TH35 Petroleum Packages General Hazard Information
349E Excavator Machine System Specifications Bucket Cylinder
C4.2 and C6.4 Engines for Caterpillar Built Machines Boost Pressure Sensor
C13 On-highway Engine Turbocharger
2008/03/24 Improved Studs Are Now Used on Certain Oil/Gas Transmission {3030, 3064, 3160}