3176C Engines for Caterpillar Built Machines Caterpillar


Sensors and Electrical Connectors

Usage:

3176C 7ZR



Illustration 1g01286660

Block diagram




Illustration 2g01284238

Sensor locations for 3176C

(1) The port for the timing calibration probe

(2) Secondary engine speed/timing sensor (camshaft)

(3) Primary engine speed/timing sensor (crankshaft)




Illustration 3g01284220

Sensor locations for 3176C

(4) Engine coolant temperature sensor

(5) Intake manifold air temperature sensor

(6) Fuel temperature sensor

(7) Intake manifold pressure sensor

(8) Atmospheric pressure sensor

(9) Engine oil pressure sensor

(10) J2/P2 ECM connector

(11) J1/P1 ECM connector

Caterpillar Information System:

120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System Electronic Control Module (ECM) - Replace
2006/08/07 The Shaft Assembly for the Drawbar Assembly Has Been Updated {6153}
572R Series II Pipelayer Power Train Oil Filter (Power Train)
Inspection and Repair Procedure to Replace the Studs for the Rocker Arm Shaft{1102} Inspection and Repair Procedure to Replace the Studs for the Rocker Arm Shaft{1102}
Field Installation of the 258-8355 Backhoe Auxiliary Lines Gp (One-Way Lines Kit) for 416E Backhoes with an Extendable Stick{5057} Field Installation of the 258-8355 Backhoe Auxiliary Lines Gp (One-Way Lines Kit) for 416E Backhoes with an Extendable Stick{5057}
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Assemble - Right Side
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Disassemble - Right Side
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Assemble - Left Side
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Disassemble - Left Side
C175-16 Engine for 795F Series AC Off-Highway Trucks Flywheel Housing - Type 1
Field Service for Positive Pin Retention 2 (PPR 2) {4169, 4170, 4171, 4174, 4175, 4180} Field Service for Positive Pin Retention 2 (PPR 2) {4169, 4170, 4171, 4174, 4175, 4180}
2006/06/26 Correction to Testing and Adjusting , "Torque Converter Stall - Test" {3101}
14M and 16M Motor Graders Hydraulic and Steering System Blade Lift Cylinder
AQUILATM DrillWizard General Information
AQUILATM DrillWizard Getting Started
AQUILATM DrillWizard Pattern Map
AQUILATM DrillWizard Productivity File
14M and 16M Motor Graders Hydraulic and Steering System Articulation Cylinder
Procedure for Filtering Off-Highway Truck Rear Axle Oil {0680, 0768, 3260, 4050} Procedure for Filtering Off-Highway Truck Rear Axle Oil {0680, 0768, 3260, 4050}
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Connector Locations
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Diagnostic Capabilities
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Event Code List
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Diagnostic Code List
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) MID 114 - CID 0168 - FMI 03
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.