C13, C15, and C18 Tier 4 Final Engines Caterpillar


Engine Oil Pan

Usage:

826K 232


图 1g02632219

表 1
220-0293 油底壳总成的技术规格 
项目  数量  零件  技术规格说明 
在油底壳之间直到接合处顶部的整个接合长度上涂覆超蓝 Loctite 蓝色 RTV 硅密封胶。 
109-5839 排放塞  组装前,用清洁的发动机机油润滑螺纹。 
拧紧至扭矩为 96 ± 15 N·m (71 ± 11 lb ft)
15  0S-1588 螺栓  按照以下步骤拧紧螺栓: 
按照图 1 中所示的数字顺序将螺栓拧紧至 45 ± 5 N·m (33 ± 4 lb ft)
几分钟后,再次按照图 1 中所示的数字顺序将螺栓拧紧至 45 ± 5 N·m (33 ± 4 lb ft)


图 2g02632256

表 2
220-0293 油底壳总成的技术规格 
项目  数量  零件  技术规格说明 
213-0677 液位开关  拧紧至扭矩为 70 ± 15 N·m (52 ± 11 lb ft)。 
向密封垫的接合处涂覆超蓝 Loctite 蓝色 RTV 硅密封胶。 

Caterpillar Information System:

C1.5 and C2.2 Generator Set Engines Cylinder Head - Install
2005/09/12 Remanufactured Rocker Arm has been Changed {1123}
C15 Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
2005/09/12 Make Sure to Clean the Shaft for the Engine Oil Scavenge Pump's Gear {1312}
C32 Petroleum Engines Engine Oil Cooler - Install
C15 and C18 Industrial Engines Engine Oil Pan
C1.5 and C2.2 Generator Set Engines Cylinder Head - Remove
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Sprocket - Remove and Install
C175 Generator Set Engines Engine Oil Screen - Remove and Install
C1.5 and C2.2 Generator Set Engines Rocker Shaft and Pushrod - Install
C1.5 and C2.2 Generator Set Engines Rocker Shaft - Assemble
C1.5 and C2.2 Generator Set Engines Rocker Shaft - Disassemble
C15 Generator Set Engines Engine Pressure Sensor Open or Short Circuit - Test
C15 Generator Set Engines Diagnostic Code Cross Reference
C15 Generator Set Engines Emergency Stop Switch Circuit - Test
G3600 Engines Engine Protective Device Connections - Inspect
2005/12/19 New Air Shutoff Valves are Now Used {1078}
C1.5 and C2.2 Generator Set Engines Camshaft - Remove
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Bucket - Remove
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Cover - Remove and Install
Modifying the Air Shutoff Valve{1078, 1078} Modifying the Air Shutoff Valve{1078, 1078}
C1.5 and C2.2 Generator Set Engines Camshaft - Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Selector Valve (Alternate Pattern Control) - Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Track Adjuster - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.