Cylinder Head Valves
Show/hide table
Illustration 1 | g03201598 |
Show/hide table
Specification for 4P-6569 Cylinder Head Gp | |||
Item | Qty | Part | Specification Description |
1 | 4 | 7N-1904 Spring | Length under test force is Test force is Free length after test is |
2 | 4 | 7N-1903 Spring | Length under test force is Test force is Free length after test is |
A | 2 | 7N-1902 Dowel | Extension is |
B | - | - | Height from the top of the cylinder head to the top of the valve guides is |
3 | 4 | 104-7184 Valve | Before assembly, coat the valve stems with clean engine oil.
Stem diameter (C) is Valve diameter (D) is Face angle is 19.25 ± 0.25 degrees. |
4 | 2 | 9Y-1846 Valve Guide | Bore of the exhaust valve guide before installation is |
5 | 2 | 9Y-1847 Valve Guide | Bore of the inlet valve guide before installation is |
6 | 4 | 6I-1713 Valve Seat Insert | Diameter of valve seat insert is Face angle is 20 degrees. |
Caterpillar Information System:
320B, 320B L and 320B N Excavators Engine Starting with Jump Start Cables - If Equipped
3500B Marine Propulsion Engines Product Description
Electronic Modular Control Panel II (EMCP II) GSC CID 0447 - FMI 12 (for MUI Engines)
Electronic Modular Control Panel II (EMCP II) GSC CID 0447 - FMI 12 (for EUI Engines)
3412C Engine Fuel Injection Pump Housing - Assemble
SPS342 Skid Mounted Pumper Fire Prevention and Explosion Prevention
SPS342 Skid Mounted Pumper General Hazard Information
3500B and 3500 Marine Propulsion Engines with EUI Option Plate Locations and Film Locations
Electronic Modular Control Panel II+ (EMCP II+) Engine Does Not Shutdown (for PEEC Engines)
G3406 and G3412 Generator Sets Engine Speed/Timing Sensor - Clean/Inspect
3500 Spark Ignited Engines Carburetor Control Linkage - EG3P Governor
2001/12/01 New Crankshaft Assemblies Include Counterweights That Are Permanently Bolted To The Crankshafts {1202, 1231}
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0566 - FMI 07 (for PEEC Engines)
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0590 - FMI 09
G3600 Engines Monitoring System
3412C Engine Fuel Injection Pump - Install
3412C Engine Engine Oil Cooler - Remove
Electronic Modular Control Panel II (EMCP II) GSC CID 0566 - FMI 07 (for MUI Engines)
3412C Engine Engine Oil Cooler - Install
3176C and 3196 Engines for Caterpillar Built Machines CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
2002/02/01 The Driver's Edition of Pocket Tec TM is Now Available {1900, 7620}
Generator Set Control Panel for Switchgear Conversion Related Components
3500 Spark Ignited Engines Exhaust Manifold - Water cooled
G3600 Engines Cylinder Head, Valves, Valve Springs and Valve Seat Inserts