Engine Speed/Timing Sensor - Clean/Inspect
Show/hide table
Illustration 1 | g00798126 |
Engine speed/timing sensor in the front cover of the governor drive (G3406 Engine) |
Show/hide table
Illustration 2 | g00798212 |
Engine speed/timing sensor in the front cover for the timing disc (G3412 Engine) |
- Remove the sensor from the cover. Check the condition of the end of the magnet. Check for signs of wear and contaminants.
- Clean the metal shavings and other debris from the face of the magnet.
- Install the sensor and adjust the sensor according to the engine's Specifications.
Caterpillar Information System:
3500 Spark Ignited Engines Carburetor Control Linkage - EG3P Governor
2001/12/01 New Crankshaft Assemblies Include Counterweights That Are Permanently Bolted To The Crankshafts {1202, 1231}
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0168 - FMI 04
Electronic Modular Control Panel II+ (EMCP II+) Component Location - 3412 PEEC and 3456 Engines
Electronic Modular Control Panel II+ (EMCP II+) Display of Voltage or Current or Power Is Inaccurate
3500B and 3500B High Displacement Generator Set Engines Ether Injection System
Electronic Modular Control Panel II+ (EMCP II+) Display of Voltage or Current Is Zero
3456 Generator Sets Engine Description
3054B Industrial Engine Maintenance Interval Schedule
3456 Generator Sets Model View Illustrations
3034 Marine Engine Manual Stop Procedure
3054, 3054B and 3056 Marine Engines Flywheel Housing - Remove and Install - 3054 and 3054B Engines
Electronic Modular Control Panel II+ (EMCP II+) Engine Does Not Shutdown (for PEEC Engines)
3500B and 3500 Marine Propulsion Engines with EUI Option Plate Locations and Film Locations
SPS342 Skid Mounted Pumper General Hazard Information
SPS342 Skid Mounted Pumper Fire Prevention and Explosion Prevention
3412C Engine Fuel Injection Pump Housing - Assemble
Electronic Modular Control Panel II (EMCP II) GSC CID 0447 - FMI 12 (for EUI Engines)
Electronic Modular Control Panel II (EMCP II) GSC CID 0447 - FMI 12 (for MUI Engines)
3500B Marine Propulsion Engines Product Description
320B, 320B L and 320B N Excavators Engine Starting with Jump Start Cables - If Equipped
G3500 Engines Cylinder Head Valves
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0566 - FMI 07 (for PEEC Engines)
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0590 - FMI 09