Connecting Rod Bearing Journal
请参阅可重复利用零件指南, SEBF8009, "主轴承和连杆轴承"和可重复利用零件指南, SEBF8041, "曲轴测量值"。
Show/hide table
| 连杆轴承轴颈 | |
| 原始尺寸轴颈 | 90.000 ± 0.020 mm (3.5433 ± 0.0008 in) |
| 小尺寸轴颈 0.63 mm (0.025 in) |
89.370 ± 0.020 mm (3.5185 ± 0.0008 in) |
| 小尺寸轴颈 1.27 mm (0.050 in) |
88.730 ± 0.020 mm (3.4933 ± 0.0008 in) |
新轴承与轴颈之间的间隙 ... 0.062 mm 到 0.160 mm (0.0024 in 到 0.0063 in)
轴承与轴颈之间的最大允许间隙 ... 0.20 mm (0.008 in)
Caterpillar Information System:
3406E Truck Engine Piston and Rings
3406E Truck Engine Connecting Rod
Torque Specifications Installation of Fittings
Torque Specifications O-Ring Face Seal Fittings
3618 Engine Cylinder Liner
Torque Specifications Straight Thread O-Ring Fittings
3406E Truck Engine Engine Oil Filler
3406E and 3456 Industrial Engines Rocker Shaft
C15 Petroleum Generator Set Engines Electronic Unit Injector Rocker Arm
3612 and 3616 Engines Priority Valve
3618 Engine Fuel Injection Lines
3618 Engine Compression Release Valve
3406C Engines for Caterpillar Built Machines Main Bearing Journal
3612 and 3616 Engines Gear Group (Front)
3406C (PEEC III) Truck Engine Cylinder Liner
3612 and 3616 Engines Air Starting Motor
3406E Truck Engine Turbocharger
Torque Specifications Flare Fittings
Torque Specifications Air Conditioning Fittings
Torque Specifications Tapered Pipe Thread Fittings
G3612 and G3616 Engines Cylinder Liner
Torque Specifications Miscellaneous Fittings
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Engine Speed/Timing Sensors - Check/Clean/Calibrate
3618 Engine Manual Valve Group (Cylinder Pressure)